Abstract:Direct carbon solid oxide fuel cells (DC-SOFCs) can convert solid carbon directly to electricity via electrochemical oxidation and require less investment compared to other liquid or gas-fed fuel cells. Anode characteristic is one of the important factors in achieving efficient and stable operation of DC-SOFCs. In this work, we have successfully designed and developed 2D multi-physics field models for DC-SOFCs with finger-like nickel-based anode (Cell-A) and traditional nickel-based anode (Cell-B), respectively. Simulation results revealed that the cell performance was significantly enhanced with increases in the anode porosity and decreases in the distance of carbon fuel to porous anode. More importantly, the anode featuring a finger-like pore structure assumed a pivotal role in cell performance. Specifically, Cell-A exhibited higher electrochemical performance compared to Cell-B due to the lower resistance for gas transport and more abundant amount of three-phase boundaries for electrochemical reactions. Experimental results verified the simulation findings by making and operating these two DC-SOFCs. The fabricated Cell-A with finger-like anode delivered higher power output of 858 and 371 mW cm−2 at 850 °C when fueled with hydrogen and activated carbon, respectively, relative to Cell-B with traditional anode. The beneficial characteristic of finger-like anode was further demonstrated by the ability of Cell-A to retain stable operation for 14.1 h at 100 mA with the fuel utilization of 15.8% at 850 °C. This study provides important guidance for the design and improvement of DC-SOFCs, and promotes the sustainable utilization of carbon resources.

Effect of Contact Type Between Anode and Carbonaceous Fuels on Direct Carbon Fuel Cell Reaction Characteristics

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

C205 EFFECTS OF TEMPERATURE ON DIRECT CARBON FUEL CELL ANODE REACTION CHARACTERISTICS(Fuel Cell-1)

Studies on the Carbon Reactions in the Anode of Deposited Carbon Fuel Cells

Reaction Characteristics of Direct Carbon Fuel Cell with YSZ Single Crystal Electrolyte and Molten Sn Anode

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Experimental investigation of Direct Carbon Fuel Cell fueled by almond shell biochar: Part II. Improvement of cell stability and performance by a three-layer planar configuration

A Comparative Study of Different Carbon Fuels in an Electrolyte-Supported Hybrid Direct Carbon Fuel Cell

Performance improvement of direct carbon fuel cell by introducing catalytic gasification process

Effect of electrode types on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell (vol 134, pg 20, 2014)

Research Development on Novel Anode of Solid Oxide Direct Carbon Fuel Cells

Comparative study on the electrochemical performance of coals and coal chars in a molten carbonate direct carbon fuel cell with a novel anode structure

Research and Development of Solid Oxide Direct Carbon Fuel Cell

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Effect of Fabrication and Operating Parameters on Electrochemical Property of Anode and Cathode for Direct Methanol Fuel Cells

Carbon deposition on nickel cermet anodes of solid oxide fuel cells operating on carbon monoxide fuel

Investigation of ceria-molten carbonate electrolyte, composite anode and its catalytical effect on various carbon fuels in molten carbonate direct coal/carbon fuel cell

Experimental Characterization and Elementary Reaction Modeling of Solid Oxide Electrolyte Direct Carbon Fuel Cell

Performance Characteristics of Liquid Antimony Anode Direct Carbon Fuel Cell

Simulation-guided design of a finger-like nickel-based anode for enhanced performance of direct carbon solid oxide fuel cells

Liquid Antimony Anode Direct Carbon Fuel Cell Fueled with Mass-Produced De-Ash Coal