Abstract:Annealing Mg-implanted homoepitaxial GaN at temperatures above 1400 °C eliminates the formation of inversion domains and leads to improved dopant activation efficiency. Extended defects, in the form of inversion domains, contain electrically inactive Mg after post-implantation annealing at temperatures as high as 1300 °C (one GPa N2 overpressure), which results in a low dopant activation efficiency. Triple-axis x-ray data reveal that implant-induced strain is fully relieved after annealing at 1300 °C for 10 min, indicating that strain-inducing point defects formed during implantation have reconfigured and inversion domains are formed. However, annealing at temperatures of 1400–1500 °C (one GPa N2 overpressure) eliminates the presence of the inversion domains. While residual defects, such as dislocation loops, still exist after annealing at and above 1400 °C, chemical analysis at multiple dislocation loops shows no sign of Mg segregation. Meanwhile, an overall decreasing trend in the dislocation loop density is observed after annealing at the higher temperatures and longer times. Additionally, once inversion domains are formed and the samples are cooled to room temperature, they are shown to dissolve with subsequent annealing above 1400 °C. While such defects have been observed before, the important finding that such defects can be dissolved with a short, higher temperature step is key. Earlier work [Breckenridge et al., J. Appl. Phys. Lett. 118, 022101 (2021)] addressing electrical measurements of these types of samples showed that annealing at 1400 °C leads to a dopant activation efficiency that is an order of magnitude higher than that observed at 1300 °C. This work complements earlier work by identifying the inversion domains, which incorporate Mg, and points to the benefits, in terms of defect density and p-type dopant activation, of using higher temperature (>1400 °C) annealing cycles to activate Mg in GaN, even if the Mg-containing inversion domains had been formed during lower temperature annealing.

Electrical isolation of p-type GaAsN epitaxial layers by ion irradiation

Implantation-Induced Electrical Isolation of Gaasn Epilayers Grown by Metalorganic Chemical Vapor Deposition

Implant Isolation of Zn-doped GaAs Epilayers: Effects of Ion Species, Doping Concentration, and Implantation Temperature

Defects Evolution in N-Type 4H-Sic Induced by Electron Irradiation and Annealing

Structural and Electrical Characterizations of Si-implanted GaN with a High Dose at Elevated Temperatures

Strain Relaxation of GaN Heterostructure Induced by High-Energy Electron Irradiation

Ni Diffusion and Its Influence on Electrical Properties of AlxGa1−xN∕GaN Heterostructures

Dissolution of Mg-enriched defects in implanted GaN and increased p-type dopant activation

Fabrication of Al/n-GaN/p-Si/Al diodes by thermal evaporation and evaluation of effect of gamma irradiation on device properties

Au ion irradiation induces ultralow thermal conductivity in GaN

Influence of Electrical Field on the Susceptibility of Gallium Nitride Transistors to Proton Irradiation

Low leakage current in isolated AlGaN/GaN heterostructure on Si substrate by N ion implantation performed at an elevated temperature

Fermi-level Stabilization Energy in Group III Nitrides

Microstructural changes in GaN and AlN under 950 MeV Au swift heavy ion irradiation

Effect of Rapid Thermal Annealing on Behavior of Nitrogen in GaAsN Alloys

Investigation on High-Energy Electron Irradiation on GaN Heterostructure by EBSD

A combined AIMD and DFT study of the low-energy radiation responses of GaN

Effects of radiation damage on GaN epitaxial layer arising from argon ion implantation for edge termination

Modification of new photoelectric material GaN by implantation of H+, He+ and N+ ion beam

Impact of 700keV Ni++ ion irradiation on structural and optical properties of GaN

Molecular Dynamics Study on the Mechanism of Gallium Nitride Radiation Damage by Alpha Particles