Abstract:We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow, by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure electrode for the sensing capacitor. The improved flow greatly lowers the footing effect during deep reactive ion etching (DRIE), and increases the proof mass by 54% compared to the traditional way, resulting in both improved device quality and a higher yield rate. Acceleration in the X direction is sensed capacitively by varying the overlapped area of a differential capacitor pair, which eliminates the nonlinear behavior by fixing the parallel-plate gap. The damping coefficient of the sensing motion is low due to the slide-film damping. A large proof mass is made using DRIE, which also ensures that dimensions of the spring beams in the Y and Z directions can be made large to lower cross axis coupling and increase the pull-in voltage. The theoretical Brownian noise floor is 0.47 µg/Hz1/2 at room temperature and atmospheric pressure. The tested frequency response of a prototype complies with the low damping design scheme. Output data for input acceleration from −1 g to 1 g are recorded by a digital multimeter and show very good linearity. The tested random bias of the prototype is 130 µg at an averaging time of around 6 s.

Implementation Of Fully-Differential Capacitance Sensing Accelerometer Using Glass Proof-Mass With Si-Vias

Study of a Novel Micromachined Capacitive Accelerometer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Implementation of A Gap-Closing Differential Capacitive Sensing Z-Axis Accelerometer on an Soi Wafer

A novel SOI-based single proof-mass 3-axis accelerometer with gap-closing differential capacitive electrodes in all sensing directions

A MEMS Sandwich Differential Capacitive Silicon-on-insulator Accelerometer

The Design and Fabrication of A Miniaturized Differential-Capacitive Triaxial Accelerometer

Design of Force-Balance Capacitive Accelerometer

A Novel Soi Z-axis Accelerometer with Gap Closing Differential Sensing Electrodes

A poly-Si based 2-axis differential capacitive-sensing accelerometer

A Novel Cmos Out-Of-Plane Accelerometer with Fully Differential Gap-Closing Capacitance Sensing Electrodes

Design and Fabrication of a Mems Capacitive Accelerometer Based on Double-Device-layers SOI Wafer.

A SOI Sandwich Differential Capacitance Accelerometer with Low-Stress Package

A Fully Symmetrical Capacitive Accelerometer with Precisely Controllable Capacitor Gap

Design and Fabrication Research on a Capacitive Accelerometer

Poly-Si Based Two-Axis Differential Capacitive-Sensing Accelerometer

A Novel Out-Of-Plane Accelerometer with Fully-Differential Sensing Circuit and Sub-Micron Gap

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Design And Implementation Of A Novel Cmos-Mems Single Proof-Mass Tri-Axis Accelerometer

A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure

Design of a Novel Low Cross-Axis Sensitivity Micro-Gravity Sandwich Capacitance Accelerometer.