Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

A Fully Symmetrical Capacitive Accelerometer with Precisely Controllable Capacitor Gap

A Stiffness-Tunable MEMS Accelerometer

Design of Force-Balance Capacitive Accelerometer

A Highly Symmetrical Capacitive Accelerometer by Silicon Four-Layer Bonding

A Novel Capacitive Accelerometer with A Highly Symmetrical Double-Sided Beam-Mass Structure

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Study of a Novel Micromachined Capacitive Accelerometer

Design and Fabrication of a Highly Symmetrical Capacitive Triaxial Accelerometer

A novel sandwich capacitive accelerometer with a symmetrical structure fabricated from a D-SOI wafer

A MEMS Sandwich Differential Capacitive Silicon-on-insulator Accelerometer

A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Implementation of A Gap-Closing Differential Capacitive Sensing Z-Axis Accelerometer on an Soi Wafer

Design and Fabrication Research on a Capacitive Accelerometer

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation

Fabrication of a MEMS Capacitive Accelerometer with Symmetrical Double-Sided Serpentine Beam-Mass Structure

A Novel Cmos Out-Of-Plane Accelerometer with Fully Differential Gap-Closing Capacitance Sensing Electrodes

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

A Micromachined Silicon-on-Glass Accelerometer with an Optimized Comb Finger Gap Arrangement

Implementation Of Fully-Differential Capacitance Sensing Accelerometer Using Glass Proof-Mass With Si-Vias

A silicon-on-glass Z-axis accelerometer with vertical sensing comb capacitors.