Abstract:The low-cycle fatigue (LCF) behaviour of SUS304-HP austenitic stainless steel was investigated systematically using tension-compression cycling under fully reversed total strain amplitude control conditions at room temperature in laboratory air. In addition to tests at constant strain amplitudes, incremental step tests (IST) were also carried out. Cyclic stress response, during companion specimen tests (CST), revealed combinations of a variable cyclic hardening, stable behaviour and softening, depending on the applied cyclic strain amplitude, while during incremental step tests it exhibited cyclic hardening character at all strain levels. Microstructure observations using optical and transmission electron microscopy (TEM) revealed that with increasing total strain amplitudes the slip band density increased and the dislocation structure changed from a planar array to a more cellular-like structure. Cyclic deformation-induced austenite/martensite transformation was observed at higher cyclic strain amplitudes. The change in microstructures during cycling is responsible for the fatigue hardening/softening behaviour of the material. The SEM micrographs revealed that at low-strain amplitudes the inclusion-type nucleation occurred near the surface, while at the higher strain amplitudes crack initiation characterized by cleavage cracking occurred not only near the surface but also in the interior of the specimen. Linear or single-slope behaviour was seen both in cyclic stress–strain and Coffin-Mason plots. Masing cyclic stress–strain behaviour was presented only in the IST method but not in the CST method.

In Situ Observation of Tensile Experiments on Austenitic Stainless Steel by Espi

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

Depth-Sensing Indentation-Based Studies of Surface Mechanical Behavior and Fatigue Damage Evolution of an Austenitic Stainless Steel Subjected to Cyclic Straining

Investigation of fatigue mechanical properties of apolycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

In Situ TEM Observation on Martensitic Transformation During Tensile Deformation of SUS304 Metastable Austenitic Stainless Steel

Dynamic Observation of Localized Strain Pulsation Generated in the Plastic Deformation Process by Electronic Speckle Pattern Interferometry

In-situ Study of Microstructural Evolution and Strain Distribution During Single Axis Tension of 316L Stainless Steel Prepared by Selective Laser Melting

Temperature-dependent mechanical properties of an austenitic-ferritic stainless steel studied by in situ tensile loading in a scanning electron microscope (SEM)

A Study of Dynamic Plasticity in Austenite Stainless Steels with a Gradient Distribution of Nanoscale Twins

Dynamic Observations on Tem In-Situ Tensile Deformation of Mn8 Steel

Pulsating Propagation of Strain-Localized Band in Plastic Deformation of an Al-Alloy Sample Observed by Electronic Speckle Pattern Interferometry(Optical Method 2)

In situ EBSD study of formation and propagation of deformation bands in a single-crystal superalloy during tensile deformation

In Situ Ebsd Observation of Grain Boundary Character Distribution Evolution During Thermomechanical Process Used for Grain Boundary Engineering of 304 Austenitic Stainless Steel

Deformation Induced Martensite Transformation and its Magnetic Memory Effect of Austenitic 304 Stainless Steel

Experimental Study of the Micromechanical Behavior of Ferrite in DP Steel Under Various Stress States

Microstructure evolution and mechanical properties of martensite stainless steel during repetitive high stress Loading-Unloading with small plastic deformation

In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation

In-situ Synchrotron X-ray Diffraction Study of Stress-Induced Phase Transformation in Ti50.1Ni40.8Cu9.1 Thin Films

In-Situ Sem Observation on Fracture Behavior of Austempered Silicon Alloyed Steel

Analysis of Wavy Propagation of Plastic Deformation Field by Dynamic Espi

In situ observations of detwinning and strain localization in pure titanium