Abstract:In view of the potential demand for the materials with excellent dynamic mechanical behavior in protective construction, the dynamic tensile mechanical properities and deformation mechanism of twinning-induced plasticity (TWIP) steel at various high strain rates were investigated in this paper by combining test research and numerical simulation. In order to explore the impact of strain rates on mechanical behaviors within the tested range, a split Hopkinson tensile bar (SHTB) was utilized to measure the mechanical responses of TWIP steel ranging from 1000 s -1 to 6500 s -1 . The Johnson-Cook (J-C) dynamic constitutive model was established based on the mechanical test results, and the mechanical properties were studied by using ANSYS/LS-DYNA. EBSD and TEM were employed to investigate the microstructure evolution of TWIP steel under dynamic loading. The results demonstrate that both strength and plasticity increase with increasing strain rate, demonstrating positive strain rate sensitivity (PSRS) which is primarily due to the activation of multiple twin systems at higher strain rates. As the strain rate increases, the mean free path of dislocation slip reduces, causing a higher strain hardening rate. The critical shear stress required for twinning is almost unchanged with an increase in strain rate, while the shear stress required for dislocation increases consistently. As the strain rate exceeds 3000 s -1 , the critical shear stress required for dislocation becomes greater than that for twinning. With increasing strain rate, the proportion of secondary twins in TWIP steel rises and the deformation twins are bent when the strain rate is 6500 s -1 owing to the effect of dislocations and stacking faults. The production of nanoscale twins at higher strain rates is a beneficial phenomenon, as it enhances both strength and plasticity. The deformation twins become thinner with an increase in strain rate, leading to a rise in the stress needed for the motion of dislocations to pass the twins, which contributes to the improvement of strength in TWIP steel. The slip systems that deforms at a disadvange have new orientations because of defromation twins. The established J-C model is appropriate well for analyzing the mechanical properties of TWIP steel in the tested range of strain rates accoring to the fingdings of test and numerical simulation. Establishing the connection of microstructure and macroscopic behavior of TWIP steel could provide a guidance for the its further study and the application in the fields of impact resistance and anti-explosion.

A Study of Dynamic Plasticity in Austenite Stainless Steels with a Gradient Distribution of Nanoscale Twins

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Static and Dynamic Mechanical Behaviors of Gradient-Nanotwinned Stainless Steel with a Composite Structure: Experiments and Modeling

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

Microstructure Evolution and Mechanical Properties of Austenite Stainless Steel with Gradient Twinned Structure by Surface Mechanical Attrition Treatment

Evading the Strength–ductility Trade-off Dilemma in Steel Through Gradient Hierarchical Nanotwins

Effects of Strain Rates and Twins Evolution on Dynamic Recrystallization Mechanisms of Austenite Stainless Steel

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

Effect of Strain Rate and Low Temperature on Mechanical Behaviour and Microstructure Evolution in Twinning-Induced Plasticity Steel

Investigation of dynamic tensile mechanical responses and deformation mechanism at high strain rates in a TWIP steel

Characterization of gradient plastic deformation in gradient nanotwinned Cu

Nano-Twinning and Martensitic Transformation Behaviors in 316L Austenitic Stainless Steel During Large Tensile Deformation

On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel

On Elastic–viscoplastic Modeling of Nanotwinned Metals Based on Coupled Intra-Twin and Twin-Boundary-mediated Deformation Mechanisms

Microstructure and Tensile Behavior of Nanostructured Gradient TWIP Steel

Revealing the grain size-dependent twinning variants and the associated strengthening mechanisms in a carbon-free austenitic steel

Quantitative analysis of strength and plasticity of a 304 stainless steel based on the stress-strain curve

Controllable Martensite Transformation and Strain-Controlled Fatigue Behavior of a Gradient Nanostructured Austenite Stainless Steel