Abstract:Hardening or softening associated with the increase of dislocation density is correlated with strain rate and dislocation density. Taking aluminum as a model material, we investigate the strain rate and dislocation density dependence of the strength and the accompanying hardening or softening effect upon a dislocation increase. This investigation is enabled by employing a newly developed crystal plasticity model, which is validated against the mechanical behaviors in an extremely wide strain rate range, and featured by a parameter-free mobile dislo-cation fraction law based on the exponential distribution of dislocation link lengths and an averaged dislocation velocity model that considers both thermally-activated waiting mechanism and drag-dominated running mechanism. Results show that at different strain rates, the material strength varies with a universal feature that it first softens as the dislocation density increases from a sufficiently low initial value, and then hardens after reaching the minimum strength, where the critical dislocation density separating the softening from hardening regimes increases with the strain rate. Microscopically, the strength dependence on dislocation density and strain rate originates from their influence on the two competing effects of a dislocation increase, where the hardening effect comes from the higher resistance to dislocation slip by increased forest dislocations while the softening effect comes from the larger quantity of mobile dislocations. These two competing effects are quantitatively evaluated by the crystal plasticity model and are further cast into the competition between the partial derivatives of normalized dislocation velocity and of normalized mobile dislocation density, and the governing equation for the critical dislocation density is thus furnished by balancing these two competing effects. Further, a complete map in the entire space of strain rate and dislocation density (epsilon, rho) is constructed for the zones of dislocation hardening or softening, where the zone-boundary curve for critical dislocation density exhibits a two-stage character and it agrees well with the available experimental data. Such a map is expected to help predict the trend for strength evolution under different serving conditions and also guide the material design according to the requirements for strength variation in service.

Strain rate-dependent hardening with dislocation-twin interaction of Fe–Mn–Al–C steel using crystal plasticity

Effects of Mn Content on the Deformation Behavior of Fe–Mn–Al–C TWIP Steels—A Computational Study

Cracking in a Fe–25Mn–3Si–3Al Steel

Strain Hardening Model of Twinning Induced Plasticity Steel at Different Temperatures

Strain Hardening Model of Twip Steels with Manganese Content

Simultaneously Enhancing the Strength and Ductility of Fe–Mn–C Twinning-Induced Plasticity Steel Via Cr/N Alloying

Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Steels

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

Strain Rate Sensitivity of C-Alloyed, High-Mn, Twinning-Induced Plasticity Steel

On the more persistently-enhanced strain hardening in carbon-increased Fe–Mn–C twinning-induced plasticity steel

Influence of carbon addition on mechanical properties of Fe–Mn–C twinning-induced plasticity steels

Strengthening contributions of mechanical twinning and dislocations to the flow stress of 1.1C-12.5Mn steel at a strain rate of unity per second: Quantitative analysis

On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel

Strain-rate dependent crystal plasticity model and aluminum softening/ hardening transition

Study on the Strain Hardening Behaviors of TWIP/TRIP Steels

Micromechanical Modeling of Work Hardening for Coupling Microstructure Evolution, Dynamic Recovery and Recrystallization: Application to High Entropy Alloys

Stress-Strain Response For Twinning-Induced Plasticity Steel With Temperature

The Role of Mn on Twinning Behavior and Tensile Properties of Coarse- and Fine-Grained Fe–Mn–C Twinning-Induced Plasticity Steels

Strain Rate-Dependent Plastic Behavior of TWIP Steel Investigated by Crystal Plasticity Model

Simultaneously Increasing Both Strength and Ductility of Fe-Mn-C Twinning-Induced Plasticity Steel Via Cr/Mo Alloying

Unusual grain-size effects on tensile deformation behavior of twinning-induced plasticity steel with low Mn content