Abstract:The phenomena of Portevin-Le Chatelier (PLC) band propagation and its pulsation accompanying the serration of load curve in a tensile test (constant load strain rate: 10(-5)/s) of aluminum alloy were directly observed by using dynamic digital speckle pattern interferometry (DSPI) method. In the plastic deformation stage, a slip band is formed and propagates repeatedly along the tensile direction with a certain speed (the beginning speed is several mm/s) and a certain bandwidth (several mm). The propagation speed decreases gradually with the increasing of plastic deformation, and finally the specimen cracks at the position where the band stops. The same slip fringe patterns observed from the front surface and rear surface of the specimen simultaneously show that the slip plane goes through the thickness of specimen. Pulsation of fringe density in the inside of the slip band accompanying with the serrations of load curve was observed. The pulsation period corresponds with the width of the serration. When the load falls in the serrations, the slip deformation happens just like an avalanche, and the time of the avalanchine slip is less than 0.03 seconds. Corresponding to the happening of the avalanchine slip, dense shrinkage fringes appear on the outside of the slip band. The specimen takes a shrinkage deformation in the outside of the slip band to compensate the elongation deformation in slip band at the moment of avalanchine slip, even for a tensile test. The elongation value in the inside of the slip band causing by the avalanchine slip is in the order of 10 mum by calculating with observed results.

Pulsating Propagation of Strain-Localized Band in Plastic Deformation of an Al-Alloy Sample Observed by Electronic Speckle Pattern Interferometry(Optical Method 2)

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

Dynamic Observation of Localized Strain Pulsation Generated in the Plastic Deformation Process by Electronic Speckle Pattern Interferometry

Visualization of Formation and Propagation of Local Deformation Slip-Band of Metal Material with Speckle Interferometry Method

Study of Propagation and Pulsation of Slip Band Using Dynamic Digital Speckle Pattern Interferometry

Investigation of Slipband Propagation in Aluminum Alloy with Dynamic Speckle Interferometry

Analysis of Wavy Propagation of Plastic Deformation Field by Dynamic Espi

The Portevin-Le Chatelier Effect in Al-Mg Alloy Investigated by Infrared Pyrometry

Investigation on Mechanism of Plastic Deformation by Digital Speckle Pattern Interferometry

Investigation of Kinematics of the Portevin-Le-Chatelier Deformation Bands with Dynamic Digital Speckle Pattern Interferometry

Dynamic Measurement of Plastic Deformation Field by ESPI

Investigation of Propagation and Pulsation of Slip Band Using Dynamic Dspi

Speckle Interferometry to Investigate Degradation Processes of Stressed Solid Materials

Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems

Digital Speckle Pattern Interferometry for Observing the Entire Process of Plastic Deformation of a Solid Object

White-Light Digital Speckle Image Correlation Analysis of the Portevin-Le Chatelier Shearing Band in Multiscale

Digital Shearography Investigation on the Out-Plane Deformation of the Portevin-Le Chatelier Bands

In Situ Observation of Tensile Experiments on Austenitic Stainless Steel by Espi

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

In-Situ Electron Channeling Contrast Imaging under Tensile Loading: Residual Stress, Dislocation Motion, and Slip Line Formation

Spatial characteristics of the Portevin-Le Chatelier deformation bands in Al-4 at%Cu polycrystals