Abstract:Charge trap memory devices with Zr x Si1–x O2 films as charge trapping layer consisting of nine [(ZrO2) m (SiO2) n (ZrO2) m (SiO2) n ] units have been fabricated and investigated. The composition distribution was modulated by controlling the m and n values in each unit. It is observed that the variation of composition distribution can induce the energy band bending and additional potential barrier, which significantly improve the program/erase speed and data retention characteristics as well as extending the temperature insensitive range. When the effective potential barrier including classic potential barrier and additional potential barrier is 1.52 eV, the memory device exhibits a lower charge loss of 4.5% at 200 °C over a period of 104 s, a wider temperature insensitive range of 20 °C–111 °C, and a faster program time of 4.0 × 10−5 s achieving +6 V flat band voltage shift. The effective potential barrier values should be in the range of 1.52–1.36 eV, taking into consideration the trade-off between the retention and program/erase speed. The additional potential barrier can increase the electron tunneling distance in the directions of tunneling layer and blocking layer, giving rise to recapture process and temperature insensitive of retention characteristics. In addition, the additional potential barrier decreases the electron tunneling distance arriving trapping layer conduction band, improving the program speed. The results provide a reference to trapping layer composition distribution for future charge trap memory applications.

Charge Tunneling and Trapping in Er Stabilized Β-Mno2 Films for Memory Applications

Growth and Memory Effect of Er-stabilized Β-Mno2 Films Grown on Si Substrates

In Situ Electron Holography Study of Charge Distribution in High-Κ Charge-Trapping Memory

In Situ Electron Holography Study Of Charge Distribution In High-Kappa Charge-Trapping Memory

Modeling of trap-assisted tunneling on performance of charge trapping memory with consideration of trap position and energy level*

The Effect of the Thickness of Tunneling Layer on the Memory Properties of (cu2o)(0.5)(al2o3)(0.5) High-K Composite Charge-Trapping Memory Devices

Trap-Assisted Charge Storage in Titania Nanocrystals Toward Optoelectronic Nonvolatile Memory.

Correlation between memory characteristics and energy band bending resulted from composition distribution of trapping layer for charge trap memory

Enhanced charge storage characteristics by ZrO2 nanocrystallites precipitated from amorphous (ZrO2)0.8(SiO 2)0.2 charge trapping layer

Colossal electroresistance in metal/ferroelectric/semiconductor tunnel diodes for resistive switching memories

Enhanced Tunnelling Electroresistance Effect Due to a Ferroelectrically Induced Phase Transition at a Magnetic Complex Oxide Interface.

Ta2o5-Tio2 Composite Charge-Trapping Dielectric for the Application of the Nonvolatile Memory

Tunable charge-trap memory based on few-layer MoS2.

Direct Observation of Interface-Dependent Multidomain State in the BaTiO3 Tunnel Barrier of a Multiferroic Tunnel Junction Memristor.

Improved Memory Characteristics of A Novel TaN/Al2O3/TiO2/HfO2/SiO2/Si Structured Charge Trapping Memory

Electrical Characteristics Of Charge Trap Flash Memory With A Composition Modulated (Zro2)(X)(Al2o3)(1-X) Film

Investigation of charge trapping mechanism in MoS2field effect transistor by incorporating Al into host La2O3as gate dielectric

Electronic Structure and Charge-Trapping Characteristics of the Al2O3-TiAlO-SiO2 Gate Stack for Nonvolatile Memory Applications

Giant tunnelling electroresistance in metal/ferroelectric/semiconductor tunnel junctions by engineering the Schottky barrier

Charge Trapping Memory Devices Employing Multi-Layered Ge/Si Nanocrystals for Storage Fabricated with ALD and PLD Methods

Ferroelectric-field-effect-enhanced Electroresistance in Metal/ferroelectric/semiconductor Tunnel Junctions