Abstract:Transparent conductive electrodes are one of the important components of organic optoelectronic devices. Mg:Ag alloys have been widely used as a semi-transparent cathode for top-emitting organic light-emitting diodes (OLEDs) or transparent OLEDs (TrOLEDs) due to their high conductivity and relatively low work function. However, their low transmittance makes the light-extraction efficiency to be comparatively low. In this study, a highly transparent (84.6% in the visible light range), conductive, laminated cathode with the structure of ZnO/Mg:Ag/ZnO was fabricated via atomic layer deposition (ALD). ALD-deposited ZnO is used to protect the vulnerable ultrathin Mg:Ag-alloy layer, while preserving its low work function for the entire structure. In particular, the bottom ZnO layer is used as an ETL, which can provide reasonable energy alignment between the cathode layer and the emission layer and prevent metal particles from penetrating into the underlying organic layer. The top-emission OLED, which is prepared in this study by using the laminated cathode, showed an 85.8% increase in brightness, with a current density of 11.2 mA/cm3 at 4.0 V, which is an ultra-low voltage compared with devices made with Mg:Ag cathodes. In addition, the total luminance of TrOLEDs increases 34.4% compared with devices using Mg:Ag cathodes. Furthermore, the average transmittance of the device was still as high as 77.19% for visible light.

Low-Voltage Inverted Transparent Vacuum Deposited Organic Light-Emitting Diodes Using Electrical Doping

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

A green top-emitting organic light-emitting device with improved luminance and efficiency

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Pure green and narrow bandwidth electroluminescence from organic light-emitting diodes

Comparison of hemostatic agents used in vascular surgery

Organic light-emitting diodes made with poly (N-vinylcarbazole) (PVK) and 8-hydroxyquinoline aluminium (Alq3)

Doped ZnO thin films as anode materials for organic light-emitting diodes

P-128: Inverted Top-Emitting Organic Light-Emitting Devices Using Vanadium Pentoxide as Anode Buffer Layer

Single-layer Small Molecular Organic Light Emitting Diodes Without Hole Transport Layer

A highly transparent laminated composite cathode for organic light-emitting diodes

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Extremely low driving voltage electrophosphorescent green organic light-emitting diodes based on a host material with small singlet-triplet exchange energy without p- or n-doping layer

Efficient White Light-Emitting Organic/Polymeric Electroluminescent Device

High performances red phosphorescent organic light-emitting diodes with low operation voltage

Construction and evaluation of organic electroluminescent devices

High Contrast Organic Light-Emitting Devices with Improved Electrical Characteristics

Investigation of Al- and Ag-Based Top-Emitting Organic Light-Emitting Diodes with Metal Oxides as Hole-Injection Layer

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance