Abstract:The use of carbon fiber-based composites in high-temperature environments has been hindered due to the inferior oxidation resistance of standard carbon fiber. Protective coatings comprised of refractory ceramics have served in enhancing the thermal endurance of carbon fiber significantly. Although zirconium and yttrium-based materials have been highly studied on their refractory characteristics, phosphate-based thermal barrier systems are scarce. Herein, we report the oxidation retardation capability of a B2O3-chemically anchored, Zr-3(PO4)(4)/YPO4 coating system on carbon fiber. In-situ, sol-gel-developed coatings with varying thicknesses and constructs were investigated for morphology, crystallography, composition, mechanical properties and thermal integrity. A uniquely consolidated B2O3 @Zr-3(PO4)(4)/YPO4 molecular arrangement was indicated in coatings by infra-red and X-ray spectroscopy. Ultimately, superior oxidation protection with an enhancement of similar to 180 degrees C over uncoated fiber was exhibited by the integrated nanocoatings, indicating its potential suitability for thermal shielding of carbon-based composites at temperatures in the range of 900-1000 degrees C. The exhibited improvement in thermal performance was attributed to the fortification provided by the coordinated B2O3 network on the fundamental Zr-3(PO4)(4)/YPO4 system.

Oxidation Protection and Behavior of In-Situ Zirconium Diboride–silicon Carbide Coating for Carbon/carbon Composites

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Effect of Lu2O3 addition on the oxidation behavior of SiC-ZrB2 composite coating at 1500 °C: Experimental and theoretical study

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Oxidation Protection of Carbon Fiber by Sol-Gel Derived Boron Doped Yttria Stabilized Zirconia Coatings

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

ZrSi2-SiC/SiC Anti-Oxidant Coatings Prepared on Graphite Spheres by Two-Step Pack Cementation Process

Combined Zr and Y Phosphate Coatings Reinforced with Chemically Anchored B2O3 for the Oxidation Inhibition of Carbon Fiber

A gradient composite coating to protect SiC-coated C/C composites against oxidation at mid and high temperature for long-life service

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

An oxidation protective coating prepared by SiC densifying HfB2-SiC skeleton for SiC-coated C/C composites at 1473, 1773, and 1973 K

Effect of silicon/graphite ratio and temperature on oxidation protective properties of SiC/ZrB2–SiC coatings prepared by pack cementation

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Oxidation protection of tri‐layer La2Zr2O7/Yb2Si2O7/SiC‐coated Cf/SiC composites at high temperature

A Thick SiC-Si Coating Prepared by One-Step Pack Cementation for Long-Term Protection of Carbon/carbon Composites Against Oxidation at 1773 K

Oxidation of Short Carbon Fiber Reinforced Zrb2-Sic Ceramics under Atmospheric and Oxyacetylene Torch Conditions

Oxidation Behaviors of C–ZrB2–SiC Composite at 2100 °C in Air and O2