Abstract:We present a novel approach to preparing bismuth acceptor doped barium titanate nanocrystal formulations that can be deposited in conjunction with polymers in order to prepare a thin film nanocomposite dielectric that exhibits desirable capacitor characteristics. Exploring the limits of dielectric function in nanocomposites is an important avenue of materials research, while paying strict attention to the overall device quality, namely permittivity, loss and equivalent series resistance (ESR). Pushing capacitor function to higher frequencies, a desirable goal from an electrical engineering point of view, presents a new set of challenges in terms of minimizing interfacial, space charge and polarization effects within the dielectric. We show the ability to synthesize BaTi0.96Bi0.04O3 or BaTi0.97Bi0.03O3 depending on nominal molar concentrations of bismuth at the onset. The low temperature solvothermal route allows for substitution at the titanium site (strongly supported by Rietveld and Raman analysis). Characterization is performed by XRD with Rietveld refinement, Raman Spectroscopy, SEM and HRTEM. A mechanism is proposed for bismuth acceptor substitution, based on the chemical reaction of the alkoxy-metal precursors involving nucleophilic addition. Dielectric analysis of the nanocrystal thin films is performed by preparing nanocrystal/PVP 2-2 nanocomposites (no annealing) and comparing BaTi0.96Bi0.04O3 and BaTi0.97Bi0.03O3 with undoped BaTiO3. Improvements of up to 25% in capacitance (permittivity) are observed, with lower loss and dramatically improved ESR, all to very high frequency ranges (>10 MHz).

Bi1/2Na1/2TiO3–BaTiO3 based thick-film capacitors for high-temperature applications

High-temperature dielectric properties of Bi0.5Na0.5TiO3–NaNbO3–Sr0.8Na0.4Nb2O6 ceramics

High-Temperature Capacitor Based on Ca-Doped Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub> Ceramics

High Temperature Capacitors Using A Bisco3-Batio3-(K1/2bi1/2)Tio3 Ternary System

Temperature stable (1-x)(0.9Na0.5Bi0.5TiO3-0.1BiAlO3)-xNaTaO3 ceramics and capacitors with ultra-wide operational range

Reducing Dielectric Loss in Na0.5Bi0.5TiO3 Based High Temperature Capacitor Material

High-temperature stable dielectrics in Mn-modified (1-x) Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-xCaTiO<sub>3</sub> ceramics

High-Temperature Capacitor Based on Ca-Doped Bi 0.5 Na 0.5 TiO 3 -BaTiO 3 Ceramics

Medium Temperature Sintered BaTiO3-based Ceramics for X8R Capacitors

High-temperature stable dielectrics in Mn-modified (1-x) Bi 0.5 Na 0.5 TiO 3 -xCaTiO 3 ceramics

Structure and Dielectric Properties of Barium Titanate Thin Films for Capacitor Applications

La2O3 Modified 0.4(ba0.8ca0.2)tio3–0.6bi(mg0.5ti0.5)o3 Ceramics for High-Temperature Capacitor Applications

TEMPERATURE-INDEPENDENT DIELECTRIC PROPERTIES OF 0.82[0.94bi0.5na0.5tio3–0.06batio3]–0.18k0.5na0.5nbo3 CERAMICS

High-Temperature Capacitor Materials Based on Modified BaTiO3

High-temperature stable dielectrics in Mn-modified (1-x) BiNaTiO-xCaTiO ceramics

High relative permittivity, low dielectric loss and good thermal stability of BaTiO 3 -bi(Mg 0.5 Zr 0.5 )O 3 solid solution

Wide Temperature Stability of BaTiO3-NaNbO3-Gd2O3 Dielectric Ceramics with Grain Core–Shell Structure

Energy Storage Properties in BaTiO3-Bi3.25La0.75Ti3O12 Thin Films

Excellent High-Temperature Dielectric Stability of BNT-based Ceramics Modified by NaNbO3

Effects of Binbo4 and Nb2O5 additions on the temperature stability of modified BaTiO3

Comprehensive dielectric performance of bismuth acceptor doped BaTiO3 based nanocrystal thin film capacitors