Abstract:Fe-Co-Ni coating, a vital type of transition metal alloy, shows great potential in the field of hydrogen storage and magnetic materials. In this study, Fe-Co-Ni coatings were prepared on Cu substrates from a deep eutectic solution of choline chloride/2Urea (ChCl/2Urea) DES by electrodeposition. The effects of deposition potential on the morphology, chemical composition, crystal structure, corrosion resistance and magnetic properties of nanostructured Fe-Co-Ni coatings were investigated. The results revealed that the reduction process of Fe-Co-Ni alloy on the Cu electrode in ChCl/2Urea DES was irreversible three-dimensional instantaneous nucleation, which was controlled by diffusion. The surface morphology, microstructure, compose and crystallite size of the Fe-Ni-Co alloy were related to the deposition potential. The Fe content of the electrodeposited alloys showed a maximum of 48.17 at% at the applied potential of −1.3 V and a positive correlation was observed between the Fe content and electrodeposition potential in the investigated potential range. The nickel-rich coatings were obtained at high potential and iron-rich coatings were obtained at low potential. The less roughness, more compact grain and uniform flat Fe-Co-Ni coatings were prepared under a more negative potential. The Fe-Co-Ni coatings were composed of face-centered cube (fcc, NiFe) and body-centered cube crystals (bcc, FeCo). With the negative shift of deposition potential, the structure of Fe-Co-Ni coatings grew preferentially toward FeCo(110) and FeCo(211) crystal surfaces. The Fe-Co-Ni coatings prepared from ChCl/2Urea DES at different deposition potentials showed good corrosion resistance. Fe-Co-Ni coating that is produced at the deposition potential of −1.2 V, exhibited a more positive corrosion potential and obvious magnetic anisotropy.

Electrodeposition of Nanocrystalline Chromium Coatings from 1-Butyl-3-methylimidazolium-hydrogen Sulfate Ionic Liquid

Electrolytic Deposition of Hydroxyapatite Coating on CoNiCrMo Substrates

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Electrochemical behavior and electrodeposition of Fe-Co-Ni thin films in choline chloride/urea deep eutectic solvent

Electrodeposition of High-Quality Cr Coatings with Solid Solution Al from Cr2+ Electrolyte

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Electrodeposition of Nanocrystalline Conife Thin Films Prepared by Cyclic Voltammetry

Amorphous Al–Mn Coating on NdFeB Magnets: Electrodeposition from AlCl3–EMIC–MnCl2 Ionic Liquid and Its Corrosion Behavior

Electrodeposition and characterization of nanocrystalline CoNiFe films

Electrochemical Deposition and Corrosion Resistance Characterization of FeCoNiCr High-Entropy Alloy Coatings

The role of electrolyte ratio in electrodeposition of nanoscale Fe Cr alloy from choline chloride-ethylene glycol ionic liquid: A suitable layer for corrosion resistance

Electrochemical Mechanism Of Cr(Iii) Reduction For Preparing Crystalline Chromium Coatings Based On 1-Ethyl-3-Methylimidazolium Bisulfate Ionic Liquid

Evaluation of corrosion resistance of electrodeposited nanocrystalline Ni–Fe alloy coatings

Electrodeposition of Ni–Co alloys from a deep eutectic solvent

Fabrication and Characterization of Oxygen-Carbon-Contained CrMnFeCoNi Coatings Electrodeposited in DMF-CH3CN Solution with and Without Supporting Electrolyte LiClO4

Microstructure and Properties of Electrodeposited Nanocrystalline Ni-Co-Fe Coatings

Electrochemical Behavior of Nanostructured Fe-Pd Alloy During Electrodeposition on Different Substrates

Electrodeposition Behavior of Nanocrystalline Conife Soft Magnetic Thin Film

Electrochemical Behavior of Cobalt from 1-Butyl-3-methylimidazolium Tetrafluoroborate Ionic Liquid

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid