Abstract:Fe-Co-Ni coating, a vital type of transition metal alloy, shows great potential in the field of hydrogen storage and magnetic materials. In this study, Fe-Co-Ni coatings were prepared on Cu substrates from a deep eutectic solution of choline chloride/2Urea (ChCl/2Urea) DES by electrodeposition. The effects of deposition potential on the morphology, chemical composition, crystal structure, corrosion resistance and magnetic properties of nanostructured Fe-Co-Ni coatings were investigated. The results revealed that the reduction process of Fe-Co-Ni alloy on the Cu electrode in ChCl/2Urea DES was irreversible three-dimensional instantaneous nucleation, which was controlled by diffusion. The surface morphology, microstructure, compose and crystallite size of the Fe-Ni-Co alloy were related to the deposition potential. The Fe content of the electrodeposited alloys showed a maximum of 48.17 at% at the applied potential of −1.3 V and a positive correlation was observed between the Fe content and electrodeposition potential in the investigated potential range. The nickel-rich coatings were obtained at high potential and iron-rich coatings were obtained at low potential. The less roughness, more compact grain and uniform flat Fe-Co-Ni coatings were prepared under a more negative potential. The Fe-Co-Ni coatings were composed of face-centered cube (fcc, NiFe) and body-centered cube crystals (bcc, FeCo). With the negative shift of deposition potential, the structure of Fe-Co-Ni coatings grew preferentially toward FeCo(110) and FeCo(211) crystal surfaces. The Fe-Co-Ni coatings prepared from ChCl/2Urea DES at different deposition potentials showed good corrosion resistance. Fe-Co-Ni coating that is produced at the deposition potential of −1.2 V, exhibited a more positive corrosion potential and obvious magnetic anisotropy.

Electrodeposition of Nanocrystalline Conife Thin Films Prepared by Cyclic Voltammetry

Electrodeposition Behavior of Nanocrystalline Conife Soft Magnetic Thin Film

Electrodeposition and characterization of nanocrystalline CoNiFe films

Study on Magnetic Properties and Nanocoating Structure of Co-Fe-P Alloy Coatings Obtained by Electroless Deposition

Preparation of thin solid CoNiFe films by pulse-reverse electroplating technique

Microstructure and Properties of Electrodeposited Nanocrystalline Ni-Co-Fe Coatings

Electrodeposition and Mechanism of Nanocrystalline Fe-Ni-Cr Alloy Foil

Electrodeposition of Nanocrystalline Chromium Coatings from 1-Butyl-3-methylimidazolium-hydrogen Sulfate Ionic Liquid

Study of Technology and Properties for Pulse Electrodeposition Nanocrystalline Fe-Ni-Cr Alloy Foil

Electrodeposition of decorative and protective Zn–Fe coating onto low-carbon steel substrate

Electrochemical Preparation of Nanograin Sized Dy-Co-Bi Alloy Thin Films by Cyclic Electrodeposition and Their Magnetism

Structural, Morphological, and Magnetic Properties of Electrodeposited CoNi Thin Films on the FTO Substrate

Electrochemical Epitaxy and XMCD Study of Co-Ni Alloy Film

Electrodeposition of Sm-Co Alloy Films with Nanocrystalline/Amorphous Structures from a Sulphamate Aqueous Solution

Electrochemical behavior and electrodeposition of Fe-Co-Ni thin films in choline chloride/urea deep eutectic solvent

Electrocrystallization Nucleation and Growth of NiFe Alloys on Brass Substrate

Electrochemical co-deposition of carbon nanotube/Ni composite layer

Electrodeposition of Co-Ni Nanostructures

Electrodeposition of Ni–Co alloys from a deep eutectic solvent

Influence of deposition parameters on the electrodeposited ternary CoFeCu coatings

A Comparative Study of Electrodeposition Techniques on the Microstructure and Property of Nanocrystalline Cobalt Deposit