Abstract:A nano-hydroxyapatite (HA) coating with appropriate thickness and morphology similar to that of human bone tissue was directly prepared onto the surfaces of carbon fibers (CFs). A mixed solution of nitric acid, hydrochloric acid, sulfuric acid, and hydrogen peroxide (NHSH) was used in the preparation process. The coating was fabricated by combining NHSH treatment and electrochemical deposition (ECD). NHSH treatment is easy to operate, produces rapid reaction, and highly effective. This method was first used to induce the nucleation and growth of HA crystals on the CF surfaces. Numerous O-containing functional groups, such as hydroxyl (-OH) and carboxyl (-COOH) groups, were grafted onto the CF surfaces by NHSH treatment (NHSH-CFs); as such, the amounts of these groups on the functionalized CFs increased by nearly 8- and 12-fold, respectively, compared with those on untreated CFs. After treatment, the NHSH-CFs not only acquired larger specific surface areas but retained surfaces free from serious corrosion or breakage. Hence, NHSH-CFs are ideal depositional substrates of HA coating during ECD. ECD was successfully used to prepare a nano-rod-like HA coating on the NHSH-CF surfaces. The elemental composition, structure, and morphology of the HA coating were effectively controlled by adjusting various technological parameters, such as the current density, deposition time, and temperature. The average central diameter of HA crystals and the coating density increased with increasing deposition time. The average central diameter of most HA crystals on the NHSH-CFs varied from approximately 60 nm to 210 nm as the deposition time increased from 60 min to 180 min. Further studies on a possible deposition mechanism revealed that numerous O-containing functional groups on the NHSH-CF surfaces could associate with electrolyte ions (Ca(2+)) to form special chemical bonds. These bonds can induce HA coating deposition and improve the interfacial bonding strength between the HA coating and NHCH-CFs. The results of this study and the proposed preparation of uniform and dense nano-HA coating provide theoretical and practical guidance for future investigations of active HA coatings on fiber materials for medical products and implants. This work also lays the foundation for the wider use of HA-coated CFs/HA composite implants in clinical application.

Electrolytic Deposition of Hydroxyapatite Coating on CoNiCrMo Substrates

Electrodeposition of Hydroxyapatite Coating on CoNiCrMo Substrate in Dilute Solution

Preparation of hydroxyapatite coating on smooth implant surface by electrodeposition

Synthesis and Charaterization of Silicon-Substituted Hydroxyapatite Coating by Electrochemical Deposition on Ti Substrate

A Novel Method to Synthesize Hydroxyapatite Coating with Hierarchical Structure

Effect of EDTA on Electrodeposition of Hydroxyapatite Coatings

Synthesized Silicon-Substituted Hydroxyapatite Coating on Titanium Substrate by Electrochemical Deposition

Synthesis and Characterization of Zn-substituted Hydroxyapatite Coatings by Electrochemical Deposition

Effect of Trisodium Citrate on Electrolytic Deposition of Hydroxyapatite Coatings

Effect of Supersaturation on the Morphology of Hydroxyapatite Crystals Deposited by Electrochemical Deposition on Titanium

Preparation of Hydroxyapatite Coating on CoCrMo Implant Using an Effective Electrochemically-Assisted Deposition Pretreatment

Electrohydrodynamic Coating of Metal with Nano-Sized Hydroxyapatite.

Study on Special Morphology Hydroxyapatite Bioactive Coating by Electrochemical Deposition

Recent advances in multifunctional hydroxyapatite coating by electrochemical deposition

The Crystal Growth Behavior of Hydroxyapatite Coating on Titanium Substrate under Electrochemical Deposition Conditions

Electrochemical Characteristics of the Hydroxyapatite Coatings Prepared by Mg Sacrificial Anode

Preparation of Hydroxyapatite Coatings on Enamel by Electrochemical Technique

Formation and Characterization of Hydroxyapatite Coating Prepared by Pulsed Electrochemical Deposition

Fabrication of Hydroxyapatite/al2o3 Bioactive Coating on Si Substrate

Controllable Preparation of a Nano-Hydroxyapatite Coating on Carbon Fibers by Electrochemical Deposition and Chemical Treatment.

Simultaneous Precipitation and Electrodeposition of Hydroxyapatite Coatings at Different Temperatures on Various Metal Substrates