Abstract:The complex environmental conditions at Cr-contaminated sites, characterized by uneven ion distribution, oxidants competition, and limited solid-phase mobility, lead to inadequate mixing of Fe-based reducing agents with Cr, posing significant challenges to the effectiveness of Cr remediation through Cr-spinel precipitation. This study investigates the distinct roles of Fe(II), Fe(III), and Cr(III) in Cr-spinel crystallization under ambient temperature and pressure. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray absorption near-edge structure spectroscopy, and Mössbauer spectroscopy were employed to elucidate the phase composition, microstructure, and ion coordination within the precipitates. Our findings indicate that Fe(II) acts as a catalyst in the formation of the spinel phase, occupying octahedral sites within the spinel structure. Under the catalytic influence of Fe(II), Fe(III) transitions into the spinel phase, occupying both the tetrahedral and the remaining octahedral sites. Meanwhile, Cr(III), due to its high octahedral site preference energy, preferentially occupies the octahedral sites. When Fe(II) or Fe(III) is present but does not meet the ideal stoichiometric ratio, a deficiency in Fe(II) leads to low yield and poor crystallinity of Cr-spinel, whereas a deficiency in Fe(III) can completely inhibit its formation. Conversely, when either Fe(II) or Fe(III) is in excess, the formation of Cr-spinel remains feasible. Furthermore, metastable Cr phases can be transformed into stable Cr-spinel by adjusting the Fe(II)/Fe(III)/Cr(III) ratio. These results highlight the broad range of conditions under which Cr-spinel mineralization can occur in environmental settings, enhancing our understanding of the mechanisms driving Cr-spinel formation in Cr-contaminated sites treated with Fe-based reducing agents. This research provides critical insights for optimizing Cr remediation strategies.

Electrochemical Mechanism Of Cr(Iii) Reduction For Preparing Crystalline Chromium Coatings Based On 1-Ethyl-3-Methylimidazolium Bisulfate Ionic Liquid

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Electrochemical Deposition of Cr from Cr3+ in the Mixed Electrolyte of [Bmim]oac/h2o

Enhanced Simulated Sunlight Photocatalytic Reduction of an Aqueous Hexavalent Chromium over Hydroxyl-Modified Graphitic Carbon Nitride

Preparation of Crystalline Chromium Coating on Cu Substrate Directly by DC Electrodepositing from Wholly Environmentally Acceptable Cr(III) Electrolyte

Electrodeposition of Nanocrystalline Chromium Coatings from 1-Butyl-3-methylimidazolium-hydrogen Sulfate Ionic Liquid

Mechanism of Cr(III)-based Oxide-Hydroxide Film Electrodeposition in an Acidic Solution

Towards cleaner production of trivalent chromium electrodeposition: Mechanism, process and challenges

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Environmentally Friendly Chromium Electrodeposition: Effect Of Pre-Electrolysis On A Cr(Iii) Bath In An Anion-Exchange Membrane Reactor

Electrodeposition of High-Quality Cr Coatings with Solid Solution Al from Cr2+ Electrolyte

Increasing Anhydrous Chromium Chloride Concentration in AlCl3–EMIC Ionic Liquid: a Step Towards Non-Hydrogen-embrittlement Chromium Electroplating

Increasing anhydrous chromium chloride concentration in AlCl 3 –EMIC ionic liquid: a step towards non-hydrogen-embrittlement chromium electroplating

Production of nano-sized chromium carbide powders from Cr 2 O 3 /C precursors by direct electrochemical reduction in molten calcium chloride

Electroreduction of Gd3+on W and Zn Electrodes in LiCl–KCl Eutectic: A Comparison Study

Study on the Electrodeposition of Chromium from Cr(III) Solution in the Presence of Oxalate and Acetate Anions

Electro-reduction of Cr(III) ions under the effects of complexing agents and Fe(II) ions

In-Situ Ftir Spectroelectrochemical Study of Chromium Hexacyanoferrate on Glassy Carbon Electrode

'Green' Cr(iii)-glycine electrolyte for the production of FeCrNi coatings: electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure

Chromium Immobilization as Cr-Spinel by Regulation of Fe(II) and Fe(III) Concentrations

Microstructure and corrosion behavior of Cr and Cr–P alloy coatings electrodeposited from a Cr(III) deep eutectic solvent