Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

A Monolithic 3d Fully-Differential Cmos Accelerometer

A Three-Axis CMOS-MEMS Accelerometer Structure With Vertically Integrated Fully Differential Sensing Electrodes

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Novel Cmos Out-Of-Plane Accelerometer with Fully Differential Gap-Closing Capacitance Sensing Electrodes

A Novel Out-Of-Plane Accelerometer with Fully-Differential Sensing Circuit and Sub-Micron Gap

A fully-differential, multiplex-sensing interface circuit monolithically integrated with tri-axis pure oxide capacitive CMOS-MEMS accelerometers

Implementation of A Monolithic Single Proof-Mass Tri-Axis Accelerometer Using Cmos-Mems Technique

A CMOS-MEMS accelerometer with tri-axis sensing electrodes arrays

Design And Implementation Of A Novel Cmos-Mems Single Proof-Mass Tri-Axis Accelerometer

A Stiffness-Tunable MEMS Accelerometer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

A MEMS Sandwich Differential Capacitive Silicon-on-insulator Accelerometer

A Novel Soi Z-axis Accelerometer with Gap Closing Differential Sensing Electrodes

Implementation of A Gap-Closing Differential Capacitive Sensing Z-Axis Accelerometer on an Soi Wafer

Monolithic Integration of Capacitive Sensors Using A Double-Side Cmos Mems Post Process

The Cmos-Mems 3-Axis Capacitive Accelerometer To Meet The Commercial Specifications

Micro-machined Resonant Out-of-plane Accelerometer with a Differential Structure Fabricated by Silicon-on-insulator–mems Technology

The Design and Fabrication of A Miniaturized Differential-Capacitive Triaxial Accelerometer

A novel SOI-based single proof-mass 3-axis accelerometer with gap-closing differential capacitive electrodes in all sensing directions

A poly-Si based 2-axis differential capacitive-sensing accelerometer