Abstract:Silicon oxynitride (SiON) is an important material to fabricate micro-electro-mechanical system (MEMS) devices due to its composition-dependent tunability in electronic and mechanical properties. In this work, the SiON film with 41.45% silicon, 32.77% oxygen and 25.78% nitrogen content was deposited by RF magnetron sputtering. Two types of optimized micro-structures including micro-cantilevers and micro-rotating-fingers were designed and fabricated using MEMS surface micromachining technology. The micro-cantilever bending tests were conducted using a nanoindenter to characterize the Young's modulus of the SiON film. Owing to the elimination of the residual stress effect on the micro-cantilever structure, higher accuracy in the Young's modulus was achieved from this technique. With the information of Young's modulus of the film, the residual stresses were characterized from the deflection of the micro-rotating-fingers. This structure was able to locally measure a large range of tensile or compressive residual stresses in a thin film with sufficient sensitivities. The results showed that the Young's modulus of the SiON film was 122GPa and the residual stresses of the SiON film were 327MPa in the crystallographic orientation of the wafer and 334MPa in the direction perpendicular to the crystallographic orientation, both in compression. This work presents a comprehensive methodology to measure the Young's modulus and residual stresses of a thin film with improved accuracy, which is promising for applications in mechanical characterization of MEMS devices.

Evaluation of Elastic Properties of Sio2 Thin Films by Ultrasonic Microscopy

Characterization Of Elastic Properties Of Sio2 Thin Films By Ultrasonic Microscopy

Properties of plasma-deposited amorphous SiO2 films

Thickness Dependence of Properties of Plasma-Deposited Amorphous SiO2 Films

Study of plasma-deposited amorphous SiO2 films using infrared absorption techniques

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Correlation Between Temperature Coefficient of Elasticity and Fourier Transform Infrared Spectra of Silicon Dioxide Films for Surface Acoustic Wave Devices

Study of Elastic Modulus and Yield Strength of Polymer Thin Films Using Atomic Force Microscopy

Investigation of Elastic Properties of WO3 Thin Films Supported on Quartz in Surface Acoustic Wave Sensing Devices

Evaluation of electrical resistivity, residual stress and surface roughness of sputtering indium tin oxide films with different thicknesses

Mechanical Properties of Mono-crystalline Silicon Thin Films Measured by Different Methods

Temperature dependence of surface acoustic wave velocity in thin metal films

Photothermal Elastic Vibration Spectra of SiO2 Film on Si

Correlation Between Propagation Loss and Silicon Dioxide Film Properties for Surface Acoustic Wave Devices

Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region

Characterization of soil stiffness anisotropy at small strains based on phase velocities of shear waves measured by novel testing apparatus

Ellipsometric Study of the Optical Properties of Silicon-Based Si : Sio2 Composite Thin Films under Different Annealing Temperatures

Characterization of the Young's Modulus and Residual Stresses for a Sputtered Silicon Oxynitride Film Using Micro-Structures

Anisotropic Elasticity of APS and HVOF CoNiCrAlY Coatings Studied by Resonant Ultrasound Spectroscopy with Laser Doppler Interferometry

Effects of elastic anisotropy on the surface stability of thin film/substrate system

Measurement Technique for Elastic and Mechanical Properties of Polycrystalline Silicon-Germanium Films Using Surface Acoustic Waves and Projection Masks