Abstract:Optically transparent, colorless Al-O-N and Al-Si-O-N coatings with discretely varied O and Si contents were fabricated by reactive direct current magnetron sputtering (R-DCMS) from elemental Al and Si targets and O2 and N2 reactive gases. The Si/Al content was adjusted through the electrical power on the Si and Al targets, while the O/N content was controlled through the O2 flow piped to the substrate in addition to the N2 flow at the targets. The structure and morphology of the coatings were studied by X-ray diffraction (XRD) and transmission electron microscopy (TEM), while the elemental composition was obtained from Rutherford backscattering spectrometry (RBS) and heavy ion elastic recoil detection analysis (ERDA). The chemical states of the elements in the coatings were analyzed by X-ray photoelectron spectroscopy (XPS). Based on analytical results, a model describing the microstructural evolution of the Al-O-N and also previously studied Al-Si-N [1, 2, 3, 4] coatings with O and Si content, respectively, is established. The universality of the microstructural evolution of these coatings with the concentration of the added element is attributed to the extra valence electron (e-) that must be incorporated into the AlN wurtzite host lattice. In the case of Al-O-N, this additional valence charge arises from the e - acceptor O replacing N in the AlN wurtzite lattice, while the e - donor Si substituting Al fulfills that role in the Al-Si-N system. In view of future applications of ternary Al-O-N and quaternary Al-Si-O-N transparent protective coatings, their mechanical properties such as residual stress (σ), hardness (HD) and Young's modulus (E) were obtained from the curvature of films deposited onto thin substrates and by nanoindentation, respectively. Moderate compressive stress levels between -0.2 and -0.5 GPa, which suppress crack formation and film-substrate delamination, could be obtained together with HD values around 25 GPa.

Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region

Stress in Amorphous Siox:H Films Prepared by Plasma-Enhanced Chemical Vapor Deposition

Study on the Mechanism and Measurement of Stress of Tio2 and Sio2 Thin-Films

Understanding the microstructural evolution and mechanical properties of transparent Al-O-N and Al-Si-O-N films

The Stress Properties of Oxide Thin Films Prepared by Reactive Electron Beam Evaporation

Thermal and Voltage Instabilities of Hafnium Oxide Films Prepared by Sputtering Technique

Effect of annealing on properties and performance of HfO2/SiO2 optical coatings for UV-applications

Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings

Optical and stress properties of ZrO_2/SiO_2 and TiO_2/SiO_2 anti-reflective coatings deposited by ion-beam-assisted deposition on a flexible substrate

Analysis of Thermal Stress in Vanadium Dioxide Thin Films by Finite Element Method

Relationship between oxidation, stresses, morphology, local resistivity, and optical properties of TiO2, Gd2O3, Er2O3, SiO2 thin films on SiC

Infrared dielectric properties of low-stress silicon oxide

Residual Stress in Sputtered Silicon Oxycarbide Thin Films

Optical and anisotropic stress properties of flexible (Ta2O5/SiO2)2 antireflection film deposited by E-gun evaporation with ion-beam assisted deposition

Mechanical loss in state-of-the-art amorphous optical coatings

Effects of deposition temperature on the mechanical and structural properties of amorphous Al-Si-O thin films prepared by RF magnetron sputtering

FTIR and XPS Investigation of Er-doped SiO2–TiO2 Films

Annealing behaviors of structural, interfacial and optical properties of HfO 2 thin films prepared by plasma assisted reactive pulsed laser deposition

High-temperature Optical Techniques Development and Its Application in Thermal Barrier Coatings

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

Reduction of residual stress in EUV Mo/Si multilayer mirrors with post-deposition thermal treatments