Abstract:Multimaterial optical coatings are a promising viable option to meet the challenging requirements (in terms of transmittance, absorbance, and thermal noise) of next-generation gravitational wave detector mirrors. In this paper we focus on ternary coatings consisting of quarter-wavelength-thick layers, where a third material ( H′ ) is added to the two presently in use, namely, silica ( L ) and titania-doped tantala ( H ), featuring higher dielectric contrast (against silica) and lower thermal noise (compared with titania-doped tantala), but higher optical losses. We seek the optimal material sequences , featuring minimal thermal (Brownian) noise under prescribed transmittance and absorbance constraints, by exhaustive simulation over all possible configurations, for different values of the optical density and extinction coefficient of the third material, including the case of amorphous silicon and silicon nitride operating at ambient and cryogenic temperatures. In all cases studied, the optimal designs consist of a stack of (H′|L) doublets topped by a stack of (H|L) doublets, confirming previous heuristic assumptions, and the achievable coating noise power spectral density reduction factor ranges from ∼0.5 at 290 K down to ∼0.1 at 20 K . The robustness of the found optimal designs against layer thickness deposition errors and uncertainties and/or fluctuations in the optical losses of the third material is also investigated. Possible margins for further thermal noise reduction by layer thickness optimization, and strategies to implement it, are discussed. https://doi.org/10.1103/PhysRevResearch.3.023172 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Mechanical loss in state-of-the-art amorphous optical coatings

Amorphous optical coatings of present gravitational-wave interferometers

Studies on Infrared Absorption Loss of Antireflection Coatings on Germanium and Potassium Chloride Substrates at the Wavelength of 10.6μm by Photothermal Deflection Technique

Measurements of mechanical thermal noise and energy dissipation in optical dielectric coatings

Optical and mechanical properties of ion-beam-sputtered Nb$_2$O$_5$ and TiO$_2$-Nb$_2$O$_5$ thin films for gravitational-wave interferometers

Mechanical Loss in Tantala/Silica Dielectric Mirror Coatings

A Systematic Error in the Internal Friction Measurement of Coatings for Gravitational Waves Detectors

High-Reflection Coatings for Gravitational-Wave Detectors: State of The Art and Future Developments

Excess noise and photo-induced effects in highly reflective crystalline mirror coatings

Inhomogeneous mechanical losses in micro-oscillators with high reflectivity coating

Measurement of the mechanical loss of a cooled reflective coating for gravitational wave detection

Effects of mixing and annealing on the optical and mechanical properties of TiO$_{2}$:Ta$_{2}$O$_{5}$ amorphous coatings

Thermo-optic noise in coated mirrors for high-precision optical measurements

Clipping Losses from a Piecewise Coated Mirror

Ternary quarter wavelength coatings for gravitational wave detector mirrors: Design optimization via exhaustive search

Measurement and simulation of mechanical and optical properties of sputtered amorphous SiC coatings

Thickness uniformity measurements and damage threshold tests of large-area GaAs/AlGaAs crystalline coatings for precision interferometry

Optical properties of germania and titania at 1064 nm and at 1550 nm

Monitoring the evolution of optical coatings during thermal annealing with real-time, in situ spectroscopic ellipsometry

Optical and mechanical properties of ion-beam-sputtered MgF$_2$ thin films for gravitational-wave interferometers

Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings