Abstract:For further efficiency improvement in kesterite-type Cu2ZnSn(S,Se)4 (CZTSSe) solar cells, it is essential to address the carrier recombination issue at the back electrode interface (BEI) caused by the undesirable built-in potential orientation toward an absorber as an n-MoSe2 interfacial layer formed. In this regard, back surface field (BSF) incorporation, i.e., field-effect passivation, shows promise for dealing with this issue due to its positive effect in decreasing recombination at the BEI. In this study, the BSF was realized with the p-type conduction transition in interfacial layer MoSe2 by incorporating Nb into the back electrode. The BSF width can be tuned via modulating the carrier concentration of the absorber, which has been demonstrated by capacitance–voltage characterization. A beyond 7% efficiency BSF-applied CZTSSe solar cell is prepared, and the effects of a tunable BSF and the mechanism underpinning device performance improvement have been investigated in detail. The wider BSF distribution in the absorber induces a decrease in reverse saturation current density (J0) due to the stronger BSF effect in suppressing BEI recombination. As a result, an accompanying increase in open-circuit voltage (VOC) and short-circuit current density (JSC) is achieved as compared to the BSF-free case. This study offers an alternative strategy to address the BEI recombination issue and also broadens the interface passivation research scope of potentially competitive kesterite solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10561?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10561</a>.EDS spectrum of a Mo:Nb film grown on the SLG substrate and statistical histograms of the absorber grain size distribution from the SEM images in <a class="internalNav" href="#fig5">Figure </a><a class="internalNav" href="#fig5">5</a>a,b; composition ratios in CZTS precursor solution; the compositions of MoSe2 and MoSe2:Nb films measured via EDS and XPS and those of CZTSSe films prepared on the SLG substrate measured by EDS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10561/suppl_file/am0c10561_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Characteristics of in-substituted CZTS thin film and bifacial solar cell.

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Improved Performance of Electroplated CZTS Thin-Film Solar Cells with Bifacial Configuration

A Strategy to Stabilize Kesterite Czts for High-Performance Solar Cells

Over 10% Efficiency Pure Sulfide Kesterite Solar Cells on Transparent Electrode with Cd-Ag Co-Alloying

Calculation of Band Alignment and Interfacial Recombination in CZTS-Based Solar Cell

Modulation of Field-Effect Passivation at the Back Electrode Interface Enabling Efficient Kesterite-Type Cu 2 ZnSn(S,Se) 4 Thin-Film Solar Cells

N‐Type Surface Design for p‐Type CZTSSe Thin Film to Attain High Efficiency

Bifacial Photovoltaic Performance of Semitransparent Ultrathin Cu(In,Ga)Se2 Solar Cells with Front and Rear Transparent Conducting Oxide Contacts

Transparent Conductive Oxide Film with Antireflective Properties for Cu<sub>2</sub>ZnSnS<sub>4</sub> Solar Cells

Interface Recombination of Cu 2 ZnSnS 4 Solar Cells Leveraged by High Carrier Density and Interface Defects

Crystal Structure and Defect Reactions in the Kesterite Solar Cell Absorber Cu[sub 2]znsns[sub 4] (CZTS): Theoretical Insights

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Modification of Back Contact in Cu 2 ZnSnS 4 Solar Cell by Inserting Al-Doped ZnO Intermediate Layer

Opto-electronic properties and solar cell efficiency modelling of Cu$_2$ZnXS$_4$ (X=Sn,Ge,Si) kesterites

Rear Interface Engineering in Solution‐Processed Submicron Cu(In,Ga)(S,Se)2 Solar Cells on Transparent Sn:In2O3 Back Contact

Unveiling the Effect of CZTSSe Quantum Superlattice on the Interfacial and Optical Properties of CZTS Kesterite Solar Cell

Effects of CuAlO2 on the heterojunction interface and performance of Cu2ZnSn(S,Se)4 thin-film solar cells

An ITO‐Free Kesterite Solar Cell

Numerical simulation on an efficient n-CdS/p-ZnSnN2/p+-Cu2SnS3/p++- CuGaSe2 thin film solar cell

Close-Spaced Sublimation of CdZnTe:In Films for Solar Energy Water Splitting