Abstract:For further efficiency improvement in kesterite-type Cu2ZnSn(S,Se)4 (CZTSSe) solar cells, it is essential to address the carrier recombination issue at the back electrode interface (BEI) caused by the undesirable built-in potential orientation toward an absorber as an n-MoSe2 interfacial layer formed. In this regard, back surface field (BSF) incorporation, i.e., field-effect passivation, shows promise for dealing with this issue due to its positive effect in decreasing recombination at the BEI. In this study, the BSF was realized with the p-type conduction transition in interfacial layer MoSe2 by incorporating Nb into the back electrode. The BSF width can be tuned via modulating the carrier concentration of the absorber, which has been demonstrated by capacitance–voltage characterization. A beyond 7% efficiency BSF-applied CZTSSe solar cell is prepared, and the effects of a tunable BSF and the mechanism underpinning device performance improvement have been investigated in detail. The wider BSF distribution in the absorber induces a decrease in reverse saturation current density (J0) due to the stronger BSF effect in suppressing BEI recombination. As a result, an accompanying increase in open-circuit voltage (VOC) and short-circuit current density (JSC) is achieved as compared to the BSF-free case. This study offers an alternative strategy to address the BEI recombination issue and also broadens the interface passivation research scope of potentially competitive kesterite solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10561?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10561</a>.EDS spectrum of a Mo:Nb film grown on the SLG substrate and statistical histograms of the absorber grain size distribution from the SEM images in <a class="internalNav" href="#fig5">Figure </a><a class="internalNav" href="#fig5">5</a>a,b; composition ratios in CZTS precursor solution; the compositions of MoSe2 and MoSe2:Nb films measured via EDS and XPS and those of CZTSSe films prepared on the SLG substrate measured by EDS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10561/suppl_file/am0c10561_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Interface Recombination of Cu 2 ZnSnS 4 Solar Cells Leveraged by High Carrier Density and Interface Defects

Unveiling microscopic carrier loss mechanisms in 12% efficient Cu 2 ZnSnSe 4 solar cells

Toward High Efficient Cu2 ZnSn(Sx ,Se1- x )4 Solar Cells: Break the Limitations of VOC and FF

A Strategy to Stabilize Kesterite Czts for High-Performance Solar Cells

Calculation of Band Alignment and Interfacial Recombination in CZTS-Based Solar Cell

Li-based Selenized Cu2ZnSnS4 Surface: Possible Route to Overcoming Voc-Deficit of Kesterite Solar Cells

Se as hetero-nucleation seeds reinforcing intermetallic diffusion for improved electrodeposition-processed CZTS solar cells

Synergetic Effects of Zn Alloying and Defect Engineering on Improving the CdS Buffer Layer of Cu2ZnSnS4 Solar Cells

Crystal Structure and Defect Reactions in the Kesterite Solar Cell Absorber Cu[sub 2]znsns[sub 4] (CZTS): Theoretical Insights

Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency

Unveiling the Effect of CZTSSe Quantum Superlattice on the Interfacial and Optical Properties of CZTS Kesterite Solar Cell

Defects in Kesterite Materials towards High-efficiency Solar Cells: Origin, Impact, Characterization, and Engineering

Modulation of Field-Effect Passivation at the Back Electrode Interface Enabling Efficient Kesterite-Type Cu 2 ZnSn(S,Se) 4 Thin-Film Solar Cells

Effects of CuAlO2 on the heterojunction interface and performance of Cu2ZnSn(S,Se)4 thin-film solar cells

Multinary Alloying Suppresses Defect Formation in Emerging Inorganic Solar Cells

Towards a high efficient Cd-free double CZTS layers kesterite solar cell using an optimized interface band alignment

Defect-assisted Nonradiative Recombination in Cu2ZnSnSe4 : A Comparative Study with Cu2ZnSnS

Defect-assisted nonradiative recombination in Cu 2 ZnSn Se 4 : A comparative study with Cu 2 ZnSn S 4

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

High Efficiency Cu 2 ZnSn(S,Se) 4 Solar Cells with Shallow Li Zn Acceptor Defects Enabled by Solution‐Based Li Post‐Deposition Treatment

A Deep Dive into Cu2ZnSnS4 (CZTS) Solar Cells: A Review of Exploring Roadblocks, Breakthroughs, and Shaping the Future