Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.

Bend Measurement Using an Etched Fiber Incorporating a Fiber Bragg Grating.

High-Sensitivity Bend Angle Measurements Using Optical Fiber Gratings

High Sensitive Bend Sensor Based on A Fiber Bragg Grating and Ellipsoid Structure

Large Range Curvature Measurement Using FBGs in Two-Core Fiber with Protective Coating

Compact Bending Sensor Based on a Fiber Bragg Grating in an Abrupt Biconical Taper.

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Two-Dimensional Bend Sensing with A Cantilever-Mounted Fbg

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

Compact Fiber Bending Sensor Based On Superimposed Gratings

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

Simultaneous measurement of temperature and bend by using an eccentric core fiber Bragg grating cascaded with a Fabry-Perot cavity

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating

Hetero-Core Chirped Fiber Bragg Grating for Cladding Mode Recoupling-Based High Sensitive Bending Measurement

Fiber Optic Bending Sensor Based on Resonance Splitting of Π-Phase-shifted FBG

Simultaneous Vector Bending and Temperature Sensing Based on Eccentric Multi-Mode Fiber Bragg Gratings

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Fiber Bragg Gratings in Heterogeneous Multicore Fiber for Directional Bending Sensing

Bending Sensor Based on Tilted Fiber Bragg Grating

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

Hetero-core fiber Bragg grating for simultaneous measurement of strain and bending based on cladding mode ratiometric detection