Abstract:We proposed and experimentally demonstrated a high-resolution omnidirectional vector bending sensor based on 7-core fiber Mach-Zehnder interferometers (MZIs), which is interrogated by the microwave photonics technique. The sensor is composed of three MZIs in the 7-core fiber, and each MZI consists of two symmetric outer cores. Instead of using the traditional wavelength demodulation method, which has the drawback of very limited resolution due to the used optical spectrum analysis devices, e.g., optical spectrum analyzer (OSA), the proposed sensor is interrogated by high-resolution microwave photonics filter (MPF) system, which is capable of offering up to KHz level measurement resolution. As a result, curvature measurement with resolution of 0.0213 m −1 is demonstrated when the used resolution of vector network analyzer (VNA) is 500 kHz. Thanks to the ultra-high measurement resolution of VNA (∼KHz), the curvature resolution can achieve 4.27 × 10 −5 m −1 in theory, which is 2 orders of magnitude higher than the traditional wavelength demodulation-based fiber bending sensors. The measured curvature sensitivity of the MZI exhibits highly bending direction dependence, attributed to different strain variation under distinct bending angle. In addition, owing to the different angular positions of cores of the MZI in the 7-core fiber, the MZIs have differential response to fiber bending. This feature has been used to develop vector bending sensing, which is manage to determine the bending direction by using any two MZIs, and the obtained average relative errors for the retrieved curvature and bending direction are 2.57% and 0.86%, respectively. The proposed sensor possesses the unique advantages of high sensitivity and high resolution over the state-of-the-art technology, which is very promising for omnidirectional vector bending sensing in the future.

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

Fibre Bragg Grating Inscription into a Seven Core Fibre and Its Application As a Vector Bending Sensor

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Two-Dimension Vector Bending Sensor Based on Helical Long-Period Gratings in Four-core Fiber

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Vector Bending Sensor Based on Tapered Few-Mode Multi-Core Fiber Enabled by Power Monitoring

7-Core Fiber-Based High-Resolution Omnidirectional Vector Bending Sensor Enabled by Microwave Photonics Filter

Fiber Vector Bend Sensor Based on Multimode Interference and Image Tapping

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

Compact Bending Sensor Based on a Fiber Bragg Grating in an Abrupt Biconical Taper.

Simultaneous Vector Bending and Temperature Sensing Based on Eccentric Multi-Mode Fiber Bragg Gratings

Bending Vector Sensor Based on the Multimode-2-Core-Multimode Fiber Structure

Fiber Bragg Gratings in Heterogeneous Multicore Fiber for Directional Bending Sensing

Two-dimensional Microbend Sensor Based on the 2-Core Fiber with Hump-Shaped Taper Fiber Structure

Two-Dimensional Bending Vector Sensor Based on the Multimode-3-Core-Multimode Fiber Structure

Temperature-insensitive vector curvature sensor based on four-core fiber offset structure

Two-dimensional Bending Vector Sensing Based on Spatial Cascaded Orthogonal Long Period Fiber.

Bending Vector Sensor Based on a Sector-Shaped Long-Period Grating