Abstract:In the last decade, tilted fiber Bragg gratings (TFBGs) have received a lot of research attention due to their unique ability for detection of bending and surrounding refractive index (SRI). Meanwhile, fabrication of TFBGs normally requires fiber pre-hydrogenation and expensive laser systems, such as excimer laser at 193 nm or femtosecond lasers. In this work, we report the first TFBG inscriptions in Boron co-doping fibers (PS1250/1500, FIBERCORE) using low cost 266 nm solid state pulsed laser and scanning phase mask lithography technique. By using this inscription set-up, gratings with tilt angles from 2° to 10° are fabricated. Influences (pulse repetition rate and scanning speed) on the grating quality and spectral performances are discussed. Furthermore, evolution of spectra during the inscription of the 10° TFBG is illustrated showing uniform growths of both the core and cladding modes. In addition to the TFBG fabrication, temperature, bending and SRI measurement are conducted. Because the core mode is restricted to propagate in the fiber core, TFBGs could automatically provide temperature compensation. The ease of TFBG fabrication and the capability of intrinsic temperature self-compensation pave the way to their potentially promising applications in curvature and refractometric measurement.

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

Fiber Bragg Gratings in Heterogeneous Multicore Fiber for Directional Bending Sensing

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Fibre Bragg Grating Inscription into a Seven Core Fibre and Its Application As a Vector Bending Sensor

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Fiber Laser Twist Sensor with Hybrid Few-Mode Tilt Bragg Grating and Few-Mode Long Period Grating

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Bending Direction Detective Fiber Sensor for Dual-Parameter Sensing Based on an Asymmetrical Thin-Core Long-Period Fiber Grating

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Fiber Bragg Grating Inscription in Four Core Fibers and Their Sensing Applications

Femtosecond Laser Inscription of FBGs in Ytterbium-Doped Fiber Based on Fluorescence Detection Techniques

Large Range Curvature Measurement Using FBGs in Two-Core Fiber with Protective Coating

Compact Bending Sensor Based on a Fiber Bragg Grating in an Abrupt Biconical Taper.

Inscription of Bragg Gratings in Few-Mode Optical Fibers

Directional Bending Sensor Based on LP11 Mode from Few-Mode Ring-Core Fiber with Long-Period Grating

Two-dimensional Microbend Sensor Based on Long-Period Fiber Gratings in an Isosceles Triangle Arrangement Three-Core Fiber.

Directional bending sensor based on spatially arrayed long period gratings in multicore fiber

Off-axis Fiber Bragg Grating Fabricated by Femtosecond Laser Direct Writing for Torsion Sensing

Simultaneous Directional Curvature and Temperature Sensor Based on a Tilted Few-Mode Fiber Bragg Grating.