Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.

High Sensitive Bend Sensor Based on A Fiber Bragg Grating and Ellipsoid Structure

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Highly Sensitive Bending Sensor Based on a Tapered Hollow Core Microstructured Optical Fiber

Orientation-discriminating Curvature Sensor Based on a Chirped Fiber Bragg Grating Fabry–Perot Interferometer

A High Sensitivity FBG Strain Sensor Based on Flexible Hinge

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Large Range Curvature Measurement Using FBGs in Two-Core Fiber with Protective Coating

Two-Axis Bending Sensor Based on Asymmetric Grid Long-Period Fiber Grating

Simultaneous measurement of temperature and bend by using an eccentric core fiber Bragg grating cascaded with a Fabry-Perot cavity

Fiber-Optic Bend Sensor Using Lp21 Mode Operation

Highly Sensitive Bending Sensor Based on Er^3+-doped DBR Fiber Laser

Highly sensitive bending sensor based on Er3+-doped DBR fiber laser

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

Fiber Bragg Grating Accelerometer Based on Asymmetric Shaped Flexible Hinge Structure

Experimental Investigation of Bending Sensor Based on Helical Structure in Hollow Core Fiber