Abstract:a novel structure of the pure macro- bending sensor based on the tilted fiber Bragg grating (TFBG) is proposed. The TFBG located in the half circle with the different diameters is bent at a constant angle with respect to the tilted grating planes. With the variations of the curvature, the core-mode resonance is unchanged and the transmission power of cladding modes detected by the photodiodes varies linearly with curvature, while the ghost mode changes by the form of two-order polynomial. So we can use the transmission power of ghost mode or other cladding modes to detect bending curvature as shape sensor. From a practical point of view, the sensor proposed here is simple, low cost and easy to implement. Moreover, it is possible to make a temperature-insensitive shape sensor due to the same temperature characteristic between the core mode and the cladding modes. In this letter, we propose and present experimentally a new structure for the curvature measurement based on the tilted fiber Bragg grating (TFBG). The transmission power of the TFBG is diminished by different degrees with an increase of the curvature of the TFBG. The curvature can be measured with the changes of transmission power in all cladding modes or the ghost mode, as the transmission power is directly proportional to the variation in the curvature. Transmission power can be detected by the photo-detectors, which enormously decreases the sensor cost and increases the practical value.

Compact Fiber Bending Sensor Based On Superimposed Gratings

Compact Bending Sensor Based on a Fiber Bragg Grating in an Abrupt Biconical Taper.

Bending Sensor Based on Tilted Fiber Bragg Grating

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

High Sensitive Bend Sensor Based on A Fiber Bragg Grating and Ellipsoid Structure

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

Pure Bending Characteristic of Tilted Fiber Bragg Grating

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Micro-bending Sensing Based on Single-Mode Fiber Spliced Multimode Fiber Bragg Grating Structure

Simultaneous Vector Bending and Temperature Sensing Based on Eccentric Multi-Mode Fiber Bragg Gratings

Research on pure bending characteristic of tilted fiber Bragg grating

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

Bend Measurement Using an Etched Fiber Incorporating a Fiber Bragg Grating.

Fiber Bragg Gratings in Heterogeneous Multicore Fiber for Directional Bending Sensing

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers