Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Two-Axis Bending Sensor Based on Asymmetric Grid Long-Period Fiber Grating

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Angularly Cascaded Long-Period Fiber Grating for Curvature and Temperature Detection

A Wide Range Curvature Sensor Based on Fiber Ring Laser With a Long-Period Fiber Grating

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Orientation-discriminating Curvature Sensor Based on a Chirped Fiber Bragg Grating Fabry–Perot Interferometer

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

High Sensitivity Strain Sensor Based on Curved LPG Fabricated in Eccentric Hollow-Core Fiber

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

A Simultaneous Measurement Sensor for Temperature and Curvature Based on Congruent Quasi-Helical Long-Period Fiber Grating

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating

Femtosecond laser fabrication of long period fiber gratings by a transversal-scanning inscription method and the research of its orientational bending characteristics