Abstract:The catalysts for methane dry reforming were commonly confronted with the problems of metal component agglomeration and carbon deposition. The catalysts made by solid-phase synthesis could effectively overcome these problems. In this paper, methane dry reforming was catalyzed over activated carbon supported Ni-catalysts prepared by solid-phase synthesis. Through this method, the catalysts exhibited a uniform metal dispersion over the carrier, with particle size at the nanoscale of 4.69 nm. Catalytic performance of the prepared catalysts was tested, and the results showed that the catalysts could effectively catalyze methane dry reforming, due to little metal agglomeration and the balanced competition between carbon deposition and carbon consumption. In the catalytic performance testing initiated at 900 °C, the conversions of CH4 and CO2 were maintained at 80.3% and 97.5% after the testing, respectively. It was also noticed the syngas generated in the testing process had a favorable H2/CO ratio, at around 1. The syngas was considered to be beneficial to the synthesis of methanol, ammonia and oxygen-containing chemicals by Fischer-Tropsch process. It should be emphasized the reactant gases conversions presented an upward trend when the testing arrived at about 2 h, revealing an enhancement of catalyst activity. In totally, the catalysts prepared by solid-phase synthesis could avoid the agglomeration of active component and the serious carbon deposition, thus slowing down the catalyst deactivation. Through this work, it was demonstrated solid-phase method could open up new possibilities for the synthesis of highly active and stable catalysts for methane dry reforming.

Samarium-impregnated nickel catalysts over SBA-15 in steam reforming of CH4 process

Promotional effect of samarium on the activity and stability of Ni-SBA-15 catalysts in dry reforming of methane

Catalytic performance of Samarium-modified Ni catalysts over Al2O3–CaO support for dry reforming of methane

Promoted Nickel–Cobalt Bimetallic Catalysts for Biogas Reforming

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4

Catalytic performance of Ni catalysts for steam reforming of methane at high space velocity

Catalytic evaluation of Ni–3%Sr-/MCM-41 in dry and steam reforming of methane

A Novel Promoting Effect of Chelating Ligand on the Dispersion of Ni Species over Ni/SBA-15 Catalyst for Dry Reforming of Methane

Role of promoter on the catalytic activity of novel hollow bimetallic Ni–Co/Al 2 O 3 catalyst in the dry reforming of methane process: Optimization using response surface methodology

Hydrogen-Rich Syngas Production via Dry and Steam Reforming of Methane in Simulated Producer Gas over ZSM-5-Supported Trimetallic Catalysts

Balancing Ni0 and Ni2+ on Γ‐al2o3 for Efficient Steam Methane Reforming

Modulating Oxidation State of Ni/CeO2 Catalyst for Steam Methane Reforming: a Theoretical Prediction with Experimental Verification

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

Preparation of Ni-Co/SiO2 catalyst by ammonia reflux impregnation and its CH4-CO2 reforming reaction performance

Ni-based bimetallic catalysts for hydrogen production via (sorption-enhanced) steam methane reforming

Hydrogen Production from the Steam Reforming of Biogas over Ni-based Catalyst: the Role of Promoters and Supports

Reforming of methane and coalbed methane over nanocomposite Ni/ZrO2 catalyst

Methane dry reforming over activated carbon supported Ni-catalysts prepared by solid phase synthesis

Reforming Of Methane And Coalbed Methane Over Nanocomposite Nni/Zro2.

Ni/x%Nb2O5/Al2O3 Catalysts Prepared via Coprecipitation-Wet Impregnation Method for Methane Steam Reforming

Template in situ inducing dispersion of nickel on SBA-15 for methane reforming with carbon dioxide