Abstract:Hydrotalcite-type solids of the form NiAl-R, where R refers to the ratio of Ni to Al (R = 2, 3, 5, 8, and 10), were successfully synthesized following co-precipitation method at pH = 12. The obtained solids were calcined at 800 °C, except for NiAl-R2 where calcination was performed at temperatures ranging between 300 and 800 °C. Following calcination, the resulting materials were evaluated for their catalytic activity and stability during the process of dry reforming of methane. Factors affecting the catalytic activity of the obtained materials such as the ratio R and calcination temperature were also studied. Prior to calcination, X-ray diffraction analyses clearly illustrated the typical hydrotalcite structure of the synthesized materials (when R ≤ 5). On the other hand, calcination at various temperatures prompted decomposition of all solids to form NiO, with exception to NiAl-R2, which upon calcinations at 800 °C was decomposed to form NiO and a second phase spinel containing NiAl2O4. The chemical composition of the obtained solids was determined by atomic absorption spectroscopy. Further characterization was performed using several techniques, including: surface area measurements (SBET), scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The reducibility of nickel species was studied via temperature-programmed reduction. The catalytic performance of the as-prepared samples was studied for dry reforming of methane under atmospheric pressure at temperatures ranging between 400 and 700 °C. The catalytic activity of the designed substances highlighted the importance of molar ratios i.e. Ni2+/Al3+ on the success of the overall dry reforming of methane process. The catalytic activity of the synthesized materials was also found to be directly proportional to the ratio of Ni/Al as well as the calcination temperature, with exception to NiAl-R2 which was found to exhibit the highest activity of all. The latter observation was perhaps associated with the lower size of the crystalline particles in conjunction with the presence of a second phase containing NiAl2O4. In this study, it is shown that the calcination temperature has a significant effect on the catalytic property and the crystallite size of the metal.

Catalytic performance of Samarium-modified Ni catalysts over Al2O3–CaO support for dry reforming of methane

Promotional effect of samarium on the activity and stability of Ni-SBA-15 catalysts in dry reforming of methane

Samarium-impregnated nickel catalysts over SBA-15 in steam reforming of CH4 process

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

Tuning Metal–Support Interactions on Ni/Al2O3 Catalysts to Improve Catalytic Activity and Stability for Dry Reforming of Methane

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

Effect of Modified Alumina Support on the Performance of Ni-Based Catalysts for CO2 Reforming of Methane

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Promoted Nickel–Cobalt Bimetallic Catalysts for Biogas Reforming

Dry reforming of methane on Ni/mesoporous-Al2O3 catalysts: Effect of calcination temperature

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Effect of the Ni/Al ratio of hydrotalcite-type catalysts on their performance in the methane dry reforming process

Catalytic Methanation of Syngas over Ni-based Catalysts with Different Supports

Catalytic Partial Oxidation of Methane to Syngas over Ca-Decorated-Al2o3-Supported Ni and Nib Catalysts

Robust nanosheet-assembled Al 2 O 3 -supported Ni catalysts for the dry reforming of methane: the effect of nickel content on the catalytic performance and carbon formation

Ni/x%Nb2O5/Al2O3 Catalysts Prepared via Coprecipitation-Wet Impregnation Method for Methane Steam Reforming

Highly dispersed Ni/Al2O3 catalysts for dry reforming of methane prepared by alkaline-induced adsorption process

Rational design of nickel-based catalyst coupling with combined methane reforming to steadily produce syngas

Carbon Deposition on Borated Alumina Supported Nano-Sized Ni Catalysts for Dry Reforming of CH4

Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels

Influence of Mn, Mg, Ce and P promoters on Ni-X/Al2O3 catalysts for dry reforming of methane