Abstract:Biogas plays a key role in the emerging renewable energy market, and biogas utilization attracts increasing attention in the renewable energy industry. As biogas consists mainly of CH4 and CO2, one of the most suitable processes for its utilization is through dry reforming of methane (DRM) for synthesis gas (syngas) production. In this study, we demonstrate the feasibility of direct biogas reforming for syngas production over promoted hydrotalcite-derived (HT) Ni catalysts. A series of 20Ni-Mg-Al HT-like catalysts with different lanthanum (La) loadings were prepared to study the influence of La-promoter on the activity of the catalysts for biogas reforming through DRM. The catalysts were characterized by N-2 physisorption, X-ray diffraction (XRD), temperature-programmed reduction (TPR), H-2-chemisorption and scanning electron microscopy (SEM). DRM experiments were performed at 600 and 750 degrees C, at a very high gas hourly space velocity (GHSV) of 240,000 ml/(g(cat).h). Furthermore, a comprehensive range of CO2/CH4 ratios was studied at 600 degrees C to assess the catalyst under different biogas compositions. Methane decomposition reactions together with post-mortem catalyst characterization were also carried out to study the influence of carbon deposition on the deactivation of the catalysts. The catalysts exhibited different behavior under different DRM reaction conditions. The 20Ni-4La catalyst showed the highest activity and stability with the highest one-pass CO2 conversion of 80.8% at 750 degrees C. The stability of the 20Ni-8La catalyst at different model biogas compositions and very high GHSV demonstrated the feasibility of our La-promoted HT-derived Ni catalysts in direct biogas reforming at a low temperature of 600 degrees C. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Promoted Nickel–Cobalt Bimetallic Catalysts for Biogas Reforming

Role of promoter on the catalytic activity of novel hollow bimetallic Ni–Co/Al 2 O 3 catalyst in the dry reforming of methane process: Optimization using response surface methodology

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: II . Effect of basic promoters

Pd+Al2O3-Supported Ni-Co Bimetallic Catalyst for H2 Production through Dry Reforming of Methane: Effect of Carbon Deposition over Active Sites

Catalytic CO2 reforming of CH4 over MgAl2O4 supported Ni-Co catalysts for the syngas production

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Exploring the role of promoters (Y, Tb and Gd) in the performance of Co-based catalyst for dry reforming of methane

Biogas Dry Reforming for Syngas Production on La Promoted Hydrotalcite-Derived Ni Catalysts

Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

Catalytic Performance of Bimetallic Cobalt–Nickel/Graphene Oxide for Carbon Dioxide Reforming of Methane

Influence of Mn, Mg, Ce and P promoters on Ni-X/Al2O3 catalysts for dry reforming of methane

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4

Enhancing the dry reforming of methane over Ni-Co-Y/WC-AC catalyst: Influence of the different Ni/Co ratio on the catalytic performance

Catalytic performance of yttrium-doped co/mesoporous alumina catalysts for methane dry reforming

Catalytic performance of Samarium-modified Ni catalysts over Al2O3–CaO support for dry reforming of methane

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Highly active and stable cobalt catalysts with tungsten carbide-activated carbon support for dry reforming methane: Effect of the different promoters

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Biogas dry reforming over Li–Ni–Al LDH-derived catalysts

Spray‐dried Ni‐Co bimetallic catalysts for dry reforming of methane