Abstract:Composite insulators have been widely used for its excellent flashover endurance capability, but the umbrella of standard composite insulators are easily been bridged in icing condition. Flashover problems caused by icing insulator have a serious threat to the safe operation of transmission lines,. It is the key technologies for the safe operation of power system which should be solved as soon as possible. The influence of two types of composite insulator umbrella structure (common type and anti-ice type) on iced AC flashover voltage characteristics in the same structure length, as well as same artificial pollution and artificial icing test conditions, but also the method of artificial iced flashover test on composite insulator were introduced. Iced flashover test results showed that the ice bridge formation could be prevented or extended if the umbrella structure design of anti-ice-type composite insulators was more reasonable. For the 750kV composite insulator under the same conditions of artificial pollution test (SDD/NSDD=0.08/0.48mg/cm2) and artificial icing test (when icing water converted to 20 °C, the conductivity is 100μS/cm and the iced thickness from 15mm), it is shown that AC iced flashover voltage of Anti-ice type increased 12%~28% than common type. Upon the existent theoretical and experimental results and based on a great of laboratory investigations carried out in environment laboratory of China UHV AC test base, for the first time this paper studies systematically the insulators shed optimization which will contribute to the designation for Ultra-UHV anti-icing composite insulators.

Flashover of Composite Insulators Without Hydrophobicity under Heavy Ice and the Secondary Contamination Conditions

Field and Laboratory Tests of Insulator Flashovers under Conditions of Light Ice Accumulation and Contamination

Influence of Hydrophobicity on Composite Insulator's Flashover Voltage Under Light Ice Accumulation Conditions

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Flashover performance of UHV&EHV post insulators under icing conditions

The optimization of 750kV anti-ice-flashing composite insulator string

Flashover Characteristics of Post Insulators Under Fog and Haze Conditions

AC Flashover Characteristics of Ice-Covered Suspension Insulators

Mechanism of contaminant accumulation and flashover of insulator in heavily polluted coastal area

Icing Flashover Characteristics of 500 Kv AC Post Insulators

Wetting Characteristics of the Hydrophobic Material Surface Through Condensation

Flashover Characteristics of a Hydrophobic Surface Covered by Water

AC Flashover Performance of Contaminated Insulators in Hot Water Vapor Washing

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Icing Flashover Tests and Arc Developing Characteristics on Superhydrophobic Surface

A New Analysis of the Composite Insulator Flashover

Influence of Environmental Temperature on Flashover Voltage of Composite Insulator

Flashover Performance of 500 kV Ice-covered Porcelain Post Insulators with Composite Assistant Shed

Analysis on Main Influencing Factors of Icing Flashover of Insulators

Influence Factors of Hydrophobicity and DC Flashover Performance for Composite Insulators

Pollution Flashover Characteristic of Composite Insulator with Non-uniform Hydrophobicity Distribution on Surfaces