Abstract:The composite crossarm insulator differs greatly from the suspension insulator in structure and arrangement. This study aims to determine the pollution flashover characteristics of composite crossarm insulators under different voltage grades. Four types of AC composite crossarm insulators with diameters ranging from 100 mm to 450 mm are subjected to artificial pollution test, and then the effects of the surface hydrophobicity state of silicone rubber, core diameter, umbrella structure, arrangement, and insulation distance on the pollution flashover voltage of the composite crossarm insulators are analyzed. Under the pollution grade 0.2/1.0 mg/cm2 and voltage grade from 66 kV to 1000 kV, if the silicone rubber surface changes from HC5 to HC6, the pollution flashover voltage of the composite crossarm insulator will increase by 13.5% to 21.0% compared with the hydrophilic surface. If the core diameter changes from 100 mm to 300 mm, the pollution flashover voltage gradient decreases with the increase in core diameter; if the core diameter changes from 300 mm to 450 mm, the pollution flashover voltage gradient increases with core diameter. Under the same insulation height and core diameter, the umbrella structure will have a certain impact on pollution flashover voltage by up to 1.7% to 5.4%. Under the horizontal arrangement, the pollution flashover voltage can increase by 10.5% to 12.1% compared with that under the vertical arrangement. Under the hydrophilic surface and weak hydrophobicity state, the pollution flashover voltage has a linear relationship with the insulation distance. The above results can provide a reference for the structural design and optimization of the composite crossarm insulator.

Influence of Environmental Temperature on Flashover Voltage of Composite Insulator

Influence Factors of Hydrophobicity and DC Flashover Performance for Composite Insulators

Influence of Parameters for Composite Insulator on DC Flashover Voltage

Pollution Flashover Characteristics of Composite Crossarm Insulator with a Large Diameter

Influence of Temperature Difference on Wetting Characteristics of Insulators

Influence of Hydrophobicity on Composite Insulator's Flashover Voltage Under Light Ice Accumulation Conditions

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Flashover of Composite Insulators Without Hydrophobicity under Heavy Ice and the Secondary Contamination Conditions

Pollution Flashover Characteristic of Composite Insulator with Non-uniform Hydrophobicity Distribution on Surfaces

DC pollution flashover and rain flashover performance for composite post insulators at high altitudes

Influence of Sand Dust in High Speed Airflow on the Flashover Characteristics of Composite Insulators

The optimization of 750kV anti-ice-flashing composite insulator string

Influence of Pollution Manners on DC Pollution Flashover Characteristics of Porcelain Insulators

Artificial Pollution Experimental Method for Outdoor Insulation of DC Transmission Lines at High Altitudes

AC Flashover Performance of Contaminated Insulators in Hot Water Vapor Washing

Analysis On Flashover Performance Of Polluted Porcelain Insulators In High Conductivity Fog Environment

Comparison of On-load Voltage Methods in Artificial Contamination Test for Insulators

Study on Flashover Voltage of Insulator Strings in High-temperature Water Vapor

Field and Laboratory Tests of Insulator Flashovers under Conditions of Light Ice Accumulation and Contamination

Foreign Body Caused Flashover on Composite Insulator in Wet and Contaminated Condition

Wet Flashover Characteristic of Composite Post Insulators at High Altitudes