Abstract:Composite insulators have been widely used for its excellent flashover endurance capability, but the umbrella of standard composite insulators are easily been bridged in icing condition. Flashover problems caused by icing insulator have a serious threat to the safe operation of transmission lines,. It is the key technologies for the safe operation of power system which should be solved as soon as possible. The influence of two types of composite insulator umbrella structure (common type and anti-ice type) on iced AC flashover voltage characteristics in the same structure length, as well as same artificial pollution and artificial icing test conditions, but also the method of artificial iced flashover test on composite insulator were introduced. Iced flashover test results showed that the ice bridge formation could be prevented or extended if the umbrella structure design of anti-ice-type composite insulators was more reasonable. For the 750kV composite insulator under the same conditions of artificial pollution test (SDD/NSDD=0.08/0.48mg/cm2) and artificial icing test (when icing water converted to 20 °C, the conductivity is 100μS/cm and the iced thickness from 15mm), it is shown that AC iced flashover voltage of Anti-ice type increased 12%~28% than common type. Upon the existent theoretical and experimental results and based on a great of laboratory investigations carried out in environment laboratory of China UHV AC test base, for the first time this paper studies systematically the insulators shed optimization which will contribute to the designation for Ultra-UHV anti-icing composite insulators.

Flashover Performance of 500 kV Ice-covered Porcelain Post Insulators with Composite Assistant Shed

Icing Flashover Characteristics of 500 Kv AC Post Insulators

Flashover performance of UHV&EHV post insulators under icing conditions

Ice Flashover Performance and Its Characterization Parameter of Composite Insulator with Booster Sheds

Study on the Icing Flashover Characteristics of Porcelain Double Sheds Suspension Insulator String

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

The optimization of 750kV anti-ice-flashing composite insulator string

Pollution Flashover Characteristics of Composite Insulators Installed Extra Large Sheds

Wet Flashover Characteristic of Composite Post Insulators at High Altitudes

Wet snow flashover characteristics of the insulator strings in ' Λ ' Shape on 500 kV transmission lines

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Influence of Hydrophobicity on Composite Insulator's Flashover Voltage Under Light Ice Accumulation Conditions

Study of the effect of ice adhesion on electrical power transmission insulator

Study on Flashover Model of UHV Substation Post Insulator in Serious Icing Condition

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Icing Flashover Leakage Current of Long Insulator Strings in 500 Kv Transmission Line

Flashover of Composite Insulators Without Hydrophobicity under Heavy Ice and the Secondary Contamination Conditions

Study on the structure of composite insulator installed extra large sheds

DC Flashover Performance of Ice-Covered Composite Insulators with Parallel Air Gaps

Wet Snow Flashover Characteristics of 500-Kv AC Insulator Strings with Different Arrangements