Abstract:Electrothermal performance of Resistive Random Access Memory (RRAM) composed of five different resistive switching oxides is studied numerically in this paper. Finite element method-based parallel computing simulator is employed to conduct the electrothermal simulation of both RRAM cell and array. Simulation results indicate that NiO and ZrO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAMs generate higher heat than HfO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> , TiO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> and ZnO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAMs, as their electric conductivity are higher in the same voltage. During the reset, ZnO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAM requires lower voltage to be transferred into high-resistance state due to its higher oxygen vacancy drift rate. The heat crosstalk problem in RRAM array is also investigated, which can decrease reliability during the reset of RRAM. Inactive cells can be transferred into high-resistance state unintentionally with stored information lost. In the same voltage, both HfO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> and TiO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAMs are less affected by heat crosstalk due to their lower oxygen vacancy drift rate.

Multi-scale Modeling of Oxygen Vacancies Assisted Charge Transport in Sub-Stoichiometric TiOx for RRAM Application

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

A Physics-based Compact Model for Set Process of Resistive Random Access Memory (RRAM) with Graphene Electrode

Modeling and Optimization of Bilayered TaO X RRAM Based on Defect Evolution and Phase Transition Effects

Formation Energy Study of Oxygen Vacancies in Undoped, Aluminum-Doped and Nitrogen-Doped Taox-Based RRAM by First Principle Simulation

Modeling the conduction mechanisms of intrinsic multi-level states in HfO<sub>x</sub>-based resistive random access memory

Dynamic Modeling and Atomistic Simulations of SET and RESET Operations in $\Hbox{tio}_{2}$-Based Unipolar Resistive Memory

Physics-Based Stochastic Three-Dimensional Modeling for Metal–Oxide Resistive Random Access Memory

A study of the transition between the non-polar and bipolar resistance switching mechanisms in the TiN/TiO2/Al memory

A Unified Physical Model of Switching Behavior in Oxide-Based RRAM

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Deep Understanding of Oxide Defects for Stochastic Charging in Nanoscale MOSFETs

Investigation of Resistive Switching Mechanisms in Ti/TiO<i><sub>x</sub></i>/Pd-Based RRAM Devices

Operando diagnostic detection of interfacial oxygen ‘breathing’ of resistive random access memory by bulk-sensitive hard X-ray photoelectron spectroscopy

Oxide-based RRAM: Requirements and Challenges of Modeling and Simulation

Study on High-Resistance State Instability of TaOx-Based RRAM

Modeling of High and Low Resistant States in Single Defect Atomristors

Oxide-Based Rram Switching Mechanism: A New Ion-Transport-Recombination Model

Realization of the Switching Mechanism in Resistance Random Access Memory (RRAMTM) Devices: Structural and Electronic Properties Affecting Electron Conductivity in Halfnium Oxide-Electrode System through First Principles Calculations

Modeling of trap-assisted tunneling on performance of charge trapping memory with consideration of trap position and energy level*

Quantitative, Dynamic TaOx Memristor/Resistive Random Access Memory Model