A uniform, low loss 1×16 power splitter based on a high Q Si3N4 ring resonator

Spencer, D.T.,Daoxin Dai,Yongbo Tang,Heck, M.J.R.

DOI: https://doi.org/10.1109/GROUP4.2012.6324158

2012-01-01

Abstract:A novel ring resonator based 1×16 optical power splitter is demonstrated on Si3N4 waveguides with excellent uniformity (0.4dB) and low excess loss (0.9dB). The device is promising for high port count splitters without cascading.

What problem does this paper attempt to address?

A Uniform, Low Loss 1&#x00d7;16 Power Splitter Based on a High Q Si<inf>3</inf>N<inf>4</inf> Ring Resonator

Daryl T. Spencer,Daoxin Dai,Yongqiang Tang,Martijn J. R. Heck,John E. Bowers

DOI: https://doi.org/10.1109/group4.2012.6324158

2012-01-01

Abstract:A novel ring resonator based 1×16 optical power splitter is demonstrated on Si 3 N 4 waveguides with excellent uniformity (0.4dB) and low excess loss (0.9dB). The device is promising for high port count splitters without cascading.
Title Realization of a Novel x N Power Splitter With Uniformly Excited Ports Permalink

Daryl T. Spencer,Daoxin Dai,Yongbo Tang,Martijn J. R. Heck,John E. Bowers

2012-01-01

Abstract:The first experimental demonstration of a novel ring resonator-based 1×N optical power splitter is reported. We fabricate the device on a Si3N4 waveguide platform utilizing a bonded thermal oxide upper cladding. Fiber coupling and nearfield-imaging experiments at 1550 nm show that a 1×16 power splitter achieves very low excess loss of 0.9 dB in addition to excellent uniformity of 0.4 dB. The resonances of the device show a loaded quality factor of 6 million and finesse of 100. The device is promising for high-port-count power splitters without the need for cascaded stages. We also discuss applications requiring the wavelength selectivity of the device.
Realization of a Novel $1\times{\rm N}$ Power Splitter with Uniformly Excited Ports

Daryl T. Spencer,Daoxin Dai,Yongbo Tang,Martijn J. R. Heck,John E. Bowers

DOI: https://doi.org/10.1109/lpt.2012.2227695

IF: 2.6

2013-01-01

IEEE Photonics Technology Letters

Abstract:The first experimental demonstration of a novel ring resonator-based 1 × N optical power splitter is reported. We fabricate the device on a Si3N4 waveguide platform utilizing a bonded thermal oxide upper cladding. Fiber coupling and near-held-imaging experiments at 1550 nm show that a 1 × 16 power splitter achieves very low excess loss of 0.9 dB in addition to excellent uniformity of 0.4 dB. The r...
Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Weiping Huang

DOI: https://doi.org/10.1016/j.ijleo.2018.12.013

IF: 3.1

2018-01-01

Optik

Abstract:A high uniformity and broad bandwidth Y junction optical beam splitter is proposed and analyzed in this paper based on silicon-on-insulator platform. By replacing the uniform branch with the multimode tapered branch, the bandwidth and the power uniformity of two output ports are unproved prominently. Furthermore, the sensitivity to fabrication accuracy is reduced by widening the splitting angle. The simulation and the experimental results confirm that the bandwidth is larger than 100 nm, the power uniformity of two output ports is enhanced 4 dB, whereas the insertion loss is less than 0.6 dB and the return loss is larger than 26 dB, respectively.
Realization Of A Novel 1 X N Power Splitter With Uniformly Excited Ports

Daryl T. Spencer,Daoxin Dai,Yongbo Tang,Martijn J R Heck,John E. Bowers

DOI: https://doi.org/10.1109/LPT.2012.2227695

IF: 2.6

2013-01-01

IEEE Photonics Technology Letters

Abstract:The first experimental demonstration of a novel ring resonator-based 1 x N optical power splitter is reported. We fabricate the device on a Si3N4 waveguide platform utilizing a bonded thermal oxide upper cladding. Fiber coupling and near-field-imaging experiments at 1550 nm show that a 1 x 16 power splitter achieves very low excess loss of 0.9 dB in addition to excellent uniformity of 0.4 dB. The resonances of the device show a loaded quality factor of 6 million and finesse of 100. The device is promising for high-port-count power splitters without the need for cascaded stages. We also discuss applications requiring the wavelength selectivity of the device.
Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Jia Xu Brian Sia,Wanjun Wang,Xin Guo,Jin Zhou,Zecen Zhang,Mohamed Said Rouifed,Xiang Li,Zhong Liang Qiao,Chong Yang Liu,Callum Littlejohns,Graham T. Reed,Hong Wang

DOI: https://doi.org/10.1109/jphot.2019.2907788

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:We designed and demonstrated TE-mode arbitrary power splitters based on adiabatic mode evolution. The power splitters are designed with a footprint of smaller than 12 × 2.9 μm2, fabricated on a 400-nm silicon-on-insulator platform, requiring only a single etch step. The optimization process and the conditions for arbitrary-power splitting are performed using three-dimensional-FDTD simulations. We prove this concept through the fabrication of asymmetrical adiabatic evolution-based power splitters with splitting ratios of 50:50, 60:40, and 70:30. The fabricated devices are shown to agree closely with simulation results. Broadband operation with low insertion loss of 0.11–0.6 dB is demonstrated across the 3.66–3.89 μm wavelength range (230 nm). This component has applications in a multitude of areas such as spectroscopic optical sensing and optical phased arrays photonic integrated circuits etc.
Design and manufacturing of glass-based optical splitter with compact layout

毛小丹,郝寅雷,杨建义,江晓清,周强,李锡华,王明华

2009-01-01

Abstract:To fabricate high performance optical splitter with compact structure, 1×16 and 1×32 splitters with lengths below 25 mm are designed and fabricated on glass substrate, by Ag+-Na+ ion-exchange and field-assisted ion diffusion technology. Testing result shows: for right-half of 1×16 optical splitter, insertion loss is 9.87-10.84 dB, excess loss being 0.87-1.84 dB, and uniformity 0.97 dB. Loss and uniformity characteristics of splitters have reached international production level.
Compact and Low-Loss Silicon Power Splitter Based on Inverse Tapers.

Xianyao Li,Hao Xu,Xi Xiao,Zhiyong Li,Jinzhong Yu,Yude Yu

DOI: https://doi.org/10.1364/ol.38.004220

2013-01-01

Abstract:A compact, low-loss, optical power splitter based on inverse tapers is proposed and fabricated on a silicon-on-insulator platform. High efficiency mode evolution between the fundamental mode of the input waveguide and the super mode of the output waveguides is realized using optimized tapers. A 1×4 splitter with insertion loss lower than 0.4 dB and uniformity better than 0.68 dB in a wavelength range from 1510 to 1550 nm are demonstrated within a footprint of only ∼75 μm2. These properties are very promising for ultrahigh density photonic integration applications.
Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Hongxiang Li,Weiwei Chen,Pengjun Wang,Shixun Dai,Yuxiao Liu,Qiang Fu,Jun Li,Yan Li,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1364/ol.401036

2020-01-01

Abstract:In this Letter, a 1 × 3 polarization-insensitive optical power splitter based on cascaded tapered silicon waveguides is proposed and experimentally demonstrated on a silicon-on-insulator platform. By utilizing the particle swarm optimization algorithm and the finite difference time domain method, the structural parameters of the coupling regions are carefully designed to achieve polarization-insensitive property, compact size, low insertion loss, high uniformity, and broad bandwidth. The coupling length can be as short as 7.3 µm. Our measurement results show that, at 1550 nm, the insertion losses of the fabricated device operating in transverse electric (TE) and transverse magnetic (TM) polarizations are, respectively, 0.068 dB and 0.62 dB. Within a bandwidth from 1525 to 1575 nm, the insertion loss is lower than 0.82 dB and the uniformity is less than 1 dB for the fabricated device operating in TE polarization, while the fabricated device operating in TM polarization can have an insertion loss smaller than 1.50 dB and a uniformity lower than 1 dB from 1528 to 1582 nm.
Compact and Low-Insertion-Loss 1×N Power Splitter in Silicon Photonics

Runkui Yao,Hongxiang Li,Bohao Zhang,Weiwei Chen,Pengjun Wang,Shixun Dai,Yuxiao Liu,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Hui Yu,Jianyi Yang,Lorenzo Pavesi

DOI: https://doi.org/10.1109/jlt.2021.3098346

IF: 4.7

2021-10-01

Journal of Lightwave Technology

Abstract:Runkui Yao, Hongxiang Li, Bohao Zhang, Weiwei Chen, Pengjun Wang, Shixun Dai, Yuxiao Liu, Jun Li, Yan Li, Qiang Fu, Tingge Dai, Hui Yu, Jianyi Yang, Lorenzo PavesiIn this paper, a novel design of a 1×N multimode-interference power splitter is proposed and investigated. By using the finite ... [J. Lightwave Technol. 39, 6253-6259 (2021)]

engineering, electrical & electronic,optics,telecommunications
Study and Fabrication of 1×16 MMI GaAs Optical Power Splitter

马慧莲,杨建义,江晓清,王明华

DOI: https://doi.org/10.3321/j.issn:0253-2239.2001.07.026

2001-01-01

Abstract:A 1×16 multimode interference (MMI) optical power splitter which allows for connecting with the standard single-mode fiber arrays for optical communication directly is designed and fabricated. The input and output single-mode waveguides are optimized by the discrete spectral index method (DSIM). Single-mode rib waveguide with low theoretical propagation loss (-0.028 dB) and with rib width of 3 μm and rib height of 2.9 μm is obtained. Analysis shows that the deep-etched MMI optical power splitter has large fabrication tolerance, big bandwidth and insensitive-polarization. The measurement results show that the function of 1 to 16 uniform splitting has been realized in the device.
Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

Hong-Son Chu,Ping Bai,Er-Ping Li,Wolfgang R. J. Hoefer

DOI: https://doi.org/10.1007/s11468-011-9239-y

IF: 2.726

2011-01-01

Plasmonics

Abstract:The key challenge of the plasmonic waveguide is to achieve simultaneously both the long propagation length and high confinement. The hybrid dielectric-loaded plasmonic waveguide consists of a SiO 2 stripe sandwiched between a Si-nanowire and a silver film and thus promises as a best candidate to overcome this challenge. We propose to exploit this unique property of this structure to design different high-efficient silicon-based plasmonic components including waveguide, power splitter, and wavelength-selective ring resonator. As a result, the proposed power splitter with a waveguide cross section ( λ 2 /60) and a strong mode confinement area (~ λ 2 /240) features a low power transmission loss (<0.4 dB) at the optimal arm length of 4 μm with respect to different separation distances of output arms. Moreover, we also demonstrate that a plasmonic ring resonator with a compact ring radius of 2 μm may achieve high optical performance such as high-extinction ratio of 30 dB, large free spectral range of 67 nm, and small bandwidth of 0.6 nm. These superior performances make them promising building blocks for integrated nanophotonic circuits.
Compact, Broadband, and Low-Loss Silicon Photonic Arbitrary Ratio Power Splitter Using Adiabatic Taper.

Junbo Zhu,Qiu Chao,Haiyang Huang,Yingxuan Zhao,Yang Li,Lue Tao,Xiaojuan She,Han Liao,Rui Huang,Zijian Zhu,Xiang Liu,Zhen Sheng,Fuwan Gan

DOI: https://doi.org/10.1364/ao.413949

IF: 1.9

2020-01-01

Applied Optics

Abstract:The arbitrary ratio power splitter is widely used in photonic integrated circuits (PICs), for signal monitoring, power equalization, signal feedback, and so on. Here we designed a fabrication-tolerant, compact, broadband, and low-loss arbitrary ratio power splitter. The proposed arbitrary ratio power splitter was realized with an adiabatically tapered silicon rib waveguide with 70 nm shallow etches and an Si3N4 waveguide. The fabrication analysis confirmed that both of them are robust to fabrication errors. 3D finite-difference time-domain simulations show a very low excess loss (less than 0.02 dB for Si3N4 waveguide and 0.05 dB for Si rib waveguide), and a broadband operating wavelength range (100 nm). Good fabrication tolerance and standard critical dimensions make the arbitrary ratio power splitter compatible with the standard fabrication process of commercial silicon photonic foundries.
Compact and economical MMI optical power splitter for optical communication

Huilian Ma,Jianyi Yang,Xiaoqing Jiang,Minghua Wang

DOI: https://doi.org/10.1109/icct.2000.890959

2000-01-01

Abstract:A 1×8 GaAs/GaAlAs optical power splitter based on a MultiMode Interference (MMI) coupler was presented. The input and output single mode waveguides were optimized by the Discrete Spectral Index Method (DSIM) and a moderate square spot on the output in deep-etched rib waveguides was obtained. The fabrication tolerance was analyzed by using the Finite Difference Beam Propagation Method (FDBPM). The device was fabricated by using the dry etching technique and the near-field output obtained. The device shows polarization-insensitive, large fabrication tolerance, low theoretical excess loss and low power imbalance.
Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

MA Hui-lian,YANG Jian-yi,LI Jin,WANG Ming-hua

DOI: https://doi.org/10.3969/j.issn.1005-8788.2000.05.010

2000-01-01

Abstract:A multi-mode interference (MMI) GaAs 1×4 optical p ower splitter that can be directly coupled with single mode fiber array was fabr icated through optimized structure design and preferential etching. The 1.3 μm He-Ne laser measurement indicated that the device has basically realized the re quirement of uniform power splitting, the power imbalance is 0.155 dB.
Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

Ma Huilian,Yang Jianyi,Zhou Qiang,Wang Minghua

DOI: https://doi.org/10.1109/apcc.1999.820609

1999-01-01

Abstract:An optical power splitter to allow for fiber connections, which is based on an MMI coupler, in GaAs/GaAlAs has been designed and fabricated. The epitaxial materials are grown by MBE. The wet chemical etching process is applied to fabricate the ribs in this device. The measuring results are presented.
Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Weiwei Chen,Jian Lin,Hongxiang LI,Pengjun Wang,Shixun Dai,Yuxiao Liu,Runkui Yao,Jun LI,Qiang Fu,Tingge Dai,Jianyi Yang

DOI: https://doi.org/10.1364/oe.471397

IF: 3.8

2022-01-01

Optics Express

Abstract:A design of a 1 × 2 multimode 3 dB optical power splitter using tapered couplers is proposed and investigated in this paper. As an example, a 1 × 2 splitter processing five-lowest order transverse-electric-polarized modes is designed and optimized by utilizing finite difference time domain method and particle swarm optimization algorithm. To verify the feasibility of this novel design, the optimized device is fabricated on a silicon-on-insulator platform. The coupling lengths of tapered couplers are respectively 6.5 µm, 6.0 µm, 3.5 µm, 5.0 µm, 5.0 µm, 7.5 µm, 6.0 µm, 5.0 µm, and 8.0 µm. Measurement results reveal that, for the fabricated splitter, the power uniformity varies from 0.041 to 0.88 dB, the crosstalk ranges from -23.96 to -14.12 dB, and the insertion loss changes from 0.089 to 1.50 dB within a bandwidth from 1520 to 1600 nm.
Proposal of a Coupled-Microring-Based Wavelength-Selective $1\times N$ Power Splitter

Daoxin Dai,Sailing He

DOI: https://doi.org/10.1109/lpt.2009.2031167

IF: 2.6

2009-01-01

IEEE Photonics Technology Letters

Abstract:A novel wavelength-selective 1 x N power splitter, which consists of a microring and N + 1 couplers, is presented. One coupler is for coupling the light signal from the input port into the microring and the other couplers are for coupling the signal light from the microring to the output ports. The channels with the resonant wavelength of the microring are dropped and split into output ports. The critical coupling condition to achieve a high extinction ratio is also given. By appropriately choosing the coupling coefficients for the input/output couplers, it is flexible to have a uniform or nonuniform power splitting as desired.
Low-loss Arbitrary-ratio 1×N Power Splitter

Ping Xue,Zhixin Wang,Che Zhao,Te Chen,Weiwei Hu

DOI: https://doi.org/10.1364/cleo_at.2017.jw2a.136

2017-01-01

Abstract:An arbitrary-ratio 1 ×N power splitter is demonstrated. The power distribution of N-way outputs can be freely customized based on demand. It also has the features of low loss, compact size, easy configuration and wide band.

A uniform, low loss 1×16 power splitter based on a high Q Si3N4 ring resonator

A Uniform, Low Loss 1&amp;#x00d7;16 Power Splitter Based on a High Q Si&lt;inf&gt;3&lt;/inf&gt;N&lt;inf&gt;4&lt;/inf&gt; Ring Resonator

Title Realization of a Novel x N Power Splitter With Uniformly Excited Ports Permalink

Realization of a Novel $1\times{\rm N}$ Power Splitter with Uniformly Excited Ports

Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Realization Of A Novel 1 X N Power Splitter With Uniformly Excited Ports

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Design and manufacturing of glass-based optical splitter with compact layout

Compact and Low-Loss Silicon Power Splitter Based on Inverse Tapers.

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Compact and Low-Insertion-Loss 1×N Power Splitter in Silicon Photonics

Study and Fabrication of 1×16 MMI GaAs Optical Power Splitter

Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

Compact, Broadband, and Low-Loss Silicon Photonic Arbitrary Ratio Power Splitter Using Adiabatic Taper.

Compact and economical MMI optical power splitter for optical communication

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Proposal of a Coupled-Microring-Based Wavelength-Selective $1\times N$ Power Splitter

Low-loss Arbitrary-ratio 1×N Power Splitter

A Uniform, Low Loss 1×16 Power Splitter Based on a High Q Si<inf>3</inf>N<inf>4</inf> Ring Resonator