Abstract:Abstract Nd 3+ ions have a large emission cross-section in the 1000 ∼ 1100 nm band. In this study, we focus on the spectral properties of Nd 3+ ions, simulate the power transfer equation of the Nd-doped ion fiber laser. The design of the Nd-doped fiber laser is aimed at laser generation by considering parameters such as absorption cross section, particle number concentration, loss coefficient, and reflectivity of the front and rear cavity mirrors. The experimental process begins with the design of specific parameters for the two cavity mirrors at 1060 nm using Matlab, based on the required reflectivity parameters. The simulation demonstrates that laser generation begins at a pump light power of 9.8 W, and the laser power reaches 36.8 W. Observe the propagation power of the signal light and pump light, when the pump light propagates in the forward direction, the forward propagation power of the pump light will decrease. This paper summarizes and innovates the numerical simulation parameters of Nd-doped ion fiber laser. The specific innovations are reflected in the proposed new emission cross section of pump light and absorption cross section of signal light, as well as the novel mathematical model for designing the front cavity mirror and the back cavity mirror. The experiments provide better data support for the preparation of 1000 ∼ 1100 nm doped Nd-doped fiber lasers.

Three-level Neodymium fiber laser incorporating photonic bandgap fiber

935 Nm Nd3+ Fibre Laser Incorporating Tapered Photonic Bandgap Fibre Filter

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

High Power Efficient 3.81 $\mu{\rm M}$ Emission from a Fiber Laser Pumped Aperiodically Poled Cascaded Lithium Niobate

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers

Efficient laser operation with low loss Nd3+-doped phosphate glass fiber under direct pumping

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Femtosecond 905nm-940nm band Nd:fiber laser

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd<SUP>3+</SUP>-doped silica fiber

Large-mode-area neodymium-doped all-solid double-cladding silicate photonic bandgap fiber with an index step of similar to 0.5%

Design of 1000-1100nm fiber laser based on neodymium ion

Broken-Ring-Based All-Solid Photonic Bandgap Fibers

Visible Supercontinuum Generation With Sub-Nanosecond 532-nm Pulses in All-Solid Photonic Bandgap Fiber

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920 nm

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

High-efficiency longwave 2085 nm laser output in low-loss Ho 3+ -doped fluorotellurite glass fiber by 1976 nm in-band pumping

Nd-Doped Polarization Maintaining All-Fiber Laser With Dissipative Soliton Resonance Mode-Locking at 905 nm

A Tunable Single- and Triple-Wavelength Nd:GGG Laser in the 1.3 μm Range with 880 nm LD Direct Pumping

Solid Photonic Bandgap Fibres and Applications