Abstract:By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first, to the best of our knowledge, demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120 nm, respectively, were applied in the fiber amplifier, to simultaneously alleviate the spectral broadening of the 1120 nm signal laser and suppress the stimulated Brillouin scattering effect. An over 1 kW narrow-linewidth 1120 nm signal laser was obtained with slope efficiency of ${\sim}{77}\% $∼77% and beam quality of ${\rm M}_x^2\sim {1.25}$Mx2∼1.25, ${\rm M}_y^2 \sim {1.17}$My2∼1.17. The amplified spontaneous emission (ASE) noise in the fiber amplifier was effectively suppressed by incorporating an ASE-filtering system between the seed laser and the main amplifier. Furthermore, the experimental results demonstrate that the spectral linewidth broadening effect is tightly related to the injected power ratios between the two seed lasers. Overall, this setup could provide a reference on obtaining and optimizing high-power narrow-linewidth fiber lasers operating in the long wavelength extreme of the Yb gain spectrum.

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

kW-class high power fiber laser enabled by active long tapered fiber

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

435 W single-frequency all-fiber amplifier at 1064 nm based on cascaded hybrid active fibers

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

Power scaling of high-power linearly polarized fiber lasers with <10 GHz linewidth

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Higher-order Mode Fiber Enables High Energy Chirped-Pulse Amplification.

High power, continuous-wave, single frequency fiber amplifier at 1091 nm and frequency doubling to 545.5 nm