Abstract:Abstract Nd 3+ ions have a large emission cross-section in the 1000 ∼ 1100 nm band. In this study, we focus on the spectral properties of Nd 3+ ions, simulate the power transfer equation of the Nd-doped ion fiber laser. The design of the Nd-doped fiber laser is aimed at laser generation by considering parameters such as absorption cross section, particle number concentration, loss coefficient, and reflectivity of the front and rear cavity mirrors. The experimental process begins with the design of specific parameters for the two cavity mirrors at 1060 nm using Matlab, based on the required reflectivity parameters. The simulation demonstrates that laser generation begins at a pump light power of 9.8 W, and the laser power reaches 36.8 W. Observe the propagation power of the signal light and pump light, when the pump light propagates in the forward direction, the forward propagation power of the pump light will decrease. This paper summarizes and innovates the numerical simulation parameters of Nd-doped ion fiber laser. The specific innovations are reflected in the proposed new emission cross section of pump light and absorption cross section of signal light, as well as the novel mathematical model for designing the front cavity mirror and the back cavity mirror. The experiments provide better data support for the preparation of 1000 ∼ 1100 nm doped Nd-doped fiber lasers.

935 Nm Nd3+ Fibre Laser Incorporating Tapered Photonic Bandgap Fibre Filter

Simultaneously Achieving a Large Negative Dispersion and a High Birefringence Over Er and Tm Dual Gain Bands in a Square Lattice Photonic Crystal Fiber

Three-level Neodymium fiber laser incorporating photonic bandgap fiber

Femtosecond 905nm-940nm band Nd:fiber laser

100nm Widely Tunable Er-doped Fiber Laser

Fabrication and properties of domestic long tapered ytterbium-doped fiber with high tapering ratio

Narrow Linewidth Tm3+-Doped Large Core Fiber Laser Based on A Femtosecond Written Fiber Bragg Grating

Linear cavity erbium-doped fiber laser employing PM-PCF based Sagnac loop comb filter for wavelength tunable laser generation

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

400 Mw Narrow Linewidth Single-Frequency Fiber Ring Cavity Laser in 2 Um Waveband

Ultra-narrow linewidth Tm<sup>3+</sup>-doped fiber laser based on intra-core fiber Bragg gratings

Tunable Nd3+-Doped Fiber Ring Laser

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd<SUP>3+</SUP>-doped silica fiber

Short-wavelength multiline erbium-doped fiber ring laser by a broadband long-period fiber grating inscribed in a taper transition

Tapered Photonic Crystal Fiber for Simplified Yb:fiber Laser Frequency Comb with Low Pulse Energy and Robust F_ceo Singals

All-fiber theta cavity multi-wavelength Tm-doped fiber laser based on a dual biconical taper filter

3 W Narrow-Linewidth Ultra-Short Wavelength Operation Near 1707 Nm in Thulium-Doped Silica Fiber Laser with Bidirectional Pumping

A Novel 3-D Microcavity Based on Bragg Fiber Dual-Tapers

Wavelength-switchable ultra-narrow linewidth fiber laser enabled by a figure-8 compound-ring-cavity filter and a polarization-managed four-channel filter

Design of 1000-1100nm fiber laser based on neodymium ion

A Twelve-Wavelength Thulium-doped Fibre Laser Based on a Microfibre Coil Resonator Incorporating Black Phosphorus