Abstract:A 2D ultrasonic array is the ultimate form of a focused ultrasonic system, which enables electronically focusing beams in a 3D space. A 2D array is also a versatile tool for various applications such as 3D imaging, high-intensity focused ultrasound, particle manipulation, and pattern generation. However, building a 2D system involves complicated technologies: fabricating a 2D transducer array, developing a pitch-matched ASIC, and interconnecting the transducer and the ASIC. Previously, we successfully demonstrated 2D capacitive micromachined ultrasonic transducer (CMUT) arrays using various fabrication technologies. In this paper, we present a 2D ultrasonic transmit phased array based on a 32 × 32 CMUT array flip-chip bonded to a pitch-matched pulser ASIC for ultrasonic neuromodulation. The ASIC consists of 32 × 32 unipolar high-voltage (HV) pulsers, each of which occupies an area of 250 μm × 250 μm. The phase of each pulser output is individually programmable with a resolution of 1/fC/16, where fC is less than 10 MHz. This enables the fine granular control of a focus. The ASIC was fabricated in the TSMC 0.18- μm HV BCD process within an area of 9.8 mm × 9.8 mm, followed by a wafer-level solder bumping process. After flip-chip bonding an ASIC and a CMUT array, we identified shorted elements in the CMUT array using the built-in test function in the ASIC, which took approximately 9 minutes to scan the entire 32 × 32 array. A compact-form-factor wireless neural stimulator system-only requiring a connected 15-V DC power supply-was also developed, integrating a power management unit, a clock generator, and a Bluetooth Low-Energy enabled microcontroller. The focusing and steering capability of the system in a 3D space is demonstrated, while achieving a spatial-peak pulse-average intensity ( ISPPA) of 12.4 and 33.1 W/ cm2; and a 3-dB focal volume of 0.2 and 0.05 mm3-at a depth of 5 mm-at 2 and 3.4 MHz, respectively. We also characterized transmission of ultrasound through a mouse skull and compensated the phase distortion due to the skull by using the programmable phase-delay function in the ASIC, achieving 10% improvement in pressure and a tighter focus. Finally, we demonstrated a ultrasonic arbitrary pattern generation on a 5 mm × 5 mm plane at a depth of 5 mm.

An efficient electrical addressing method using through-wafer vias for two-dimensional ultrasonic arrays

Highly integrated 2-D capacitive micromachined ultrasonic transducers

SEMICONDUCTOR PACKAGE STRUCTURE HAVING MICRO-ISOLATION CAVITY

Two 10Gb/s/pin Low-Power Interconnect Methods for 3D ICs

Through-silicon-via technology for 3D integration

Thru-Wafer Interconnect for Soi-Mems 3d Wafer-Level Hermetic Packaging

Silicon Micromachining Of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects For 3-D Multichip Packaging

Redundant Vias Insertion for Performance Enhancement in 3D ICs.

Through wafer via technology for 3-D packaging

Implementation of three-dimensional SOI-MEMS wafer-level packaging using through-wafer interconnections

High density and through wafer copper interconnections and solder bumps for MEMS wafer-level packaging

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

A wet process to etch arrayed vias for through silicon via application of 3D packaging

High Aspect Ratio Copper Through-Silicon-vias for 3D Integration

Fabrication of high aspect ratio, non-line-of-sight vias in silicon carbide by a two-photon absorption method

A Wearable Ultrasonic Neurostimulator-Part II: A 2D CMUT Phased Array System With a Flip-Chip Bonded ASIC

Fabrication of 2-D Capacitive Micromachined Ultrasonic Transducer (CMUT) Array through Silicon Wafer Bonding

Implementation of Silicon-on-glass MEMS Devices with Embedded Through-Wafer Silicon Vias Using the Glass Reflow Process for Wafer-Level Packaging and 3D Chip Integration

An Efficient Method for Comprehensive Modeling and Parasitic Extraction of Cylindrical Through-Silicon Vias in 3d Ics

Fabrication and Filling Quality Optimization of the High Density and Small Size Through Silicon Via Array for Three-Dimensional Packaging

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via