Abstract:With decreasing die size and the ability to store multiple bits in a single cell, resistive random access memory (ReRAM) can be used to increase storage density, making it a promising technology for the next generation of memory. However, multi-level write operations suffer from impairments such as large latency, high energy consumption, and reliability issues. In this paper, we study different mechanisms affecting the "multi-level incremental step pulse with verify algorithm" (M-ISPVA) on a 1-transistor-1-resistor (1T1R) model in transient simulation at the component and the circuit level with focus on resistance control and energy consumption during the entire process of state transitions. By dividing the M-ISPVA into a triggering and a controlling period, we discovered the transistor to operate in the ohmic region during the triggering period as a voltage-controlled resistance and in the saturation region during the controlling period as a voltage-controlled current limiter. Controlling the gate voltage in the triggering period can move the triggering point to a desired write voltage and in the controlling period can increase or decrease resistance steps per pulse to attain a desired speed of resistance change. In addition, the major energy portion is consumed for reset operation during triggering and for set operation during the controlling period. To optimize write performance, extra precaution must be taken when defining resistance states with target read-out current and gate voltage with the focus on evenly balanced latencies between all transitions. A direct multi-level write operation shows 67.5 % latency and 62.5 % energy saving compared to indirect ones, but suffers from only unidirectional control, making it non-feasible. In case of a 4 k bit memory, the more reliable M-ISPVA faces almost 37 % higher latency and energy compared to the basic ISPVA.

Degradation of Gate Voltage Controlled Multilevel Storage in One Transistor One Resistor Electrochemical Metallization Cell

Methodology for Stability Evaluation on the Multi-Level Storages of Oxide-Based Conductive Bridge Ram (Cbram)

Analysis of Tail Bits Generation of Multilevel Storage in Resistive Switching Memory

Enhancing the Data Reliability of Multilevel Storage in Phase Change Memory with 2T2R Cell Structure

Investigation of the Forming Program Failture in 1T1R Structure

A Novel Defect-Engineering-Based Implementation for High-Performance Multilevel Data Storage in Resistive Switching Memory

Transparent multi-level-cell nonvolatile memory with dual-gate amorphous indium-gallium-zinc oxide thin-film transistors

Uniformity Improvement in 1T1R RRAM With Gate Voltage Ramp Programming

Investigation of Multi-Level Cell Characteristic in Amorphous Indium-Gallium-Zinc Oxide Thin-Film-Transistor Based 1T-1R Non-Volatile Memory Device

Study of Multi-Level Characteristics for 3D Vertical Resistive Switching Memory.

Suppression of endurance degradation by applying constant voltage stress in one-transistor and one-resistor resistive random access memory

Multi-level Cell STT-RAM: is It Realistic or Just a Dream?

Superior Retention of Low-Resistance State in Conductive Bridge Random Access Memory with Single Filament Formation

Unveiling the influence of surrounding materials and realization of multi-level storage in resistive switching memory

High-Source–Drain Voltage-Induced Reliability Issues of Sub-28-nm Node MOSFET’s Application in Resistive-Type Nonvolatile Memory Array

Optimizing multi-level ReRAM memory for low latency and low energy consumption

ASAP: an Efficient and Reliable Programming Algorithm for Multi-level RRAM Cell

Multilevel resistive switching in HfOx/TiOx/HfOx/TiOx multilayer-based RRAM with high reliability

Adaptive Circuit Approaches to Low-Power Multi-Level/Cell FeFET Memory

Reliable Multistate Data Storage with Low Power Consumption by Selective Oxidation of Pyramid-Structured Resistive Memory

A Semi-Floating Gate Memory with Tensile Stress for Enhanced Performance