Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Multilevel resistive switching in HfOx/TiOx/HfOx/TiOx multilayer-based RRAM with high reliability

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Study on Multilevel Resistive Switching Behavior with Tunable ON/OFF Ratio Capability in Forming-Free ZnO QDs-Based RRAM

Self-compliance Multilevel Resistive Switching Characteristics in TiN/HfOx/Al/Pt RRAM Devices

Thermal Stability and Data Retention of Resistive Random Access Memory with Hfox/Zno Double Layers

Characteristics of Multilevel Storage and Switching Dynamics in Resistive Switching Cell of Al2O3/HfO2/Al2O3 Sandwich Structure

Study of Multi-Level Characteristics for 3D Vertical Resistive Switching Memory.

Investigation of Resistive Switching in Cu-Doped Hfo2 Thin Film for Multilevel Non-Volatile Memory Applications

High Performance Multilevel Data Storage in Tatin/Hfox/Pt Based Rram Using Bipolar and Unipolar Combined Switching Mode

Optimization of the Forming Process of HfOx-Based RRAM to Achieve Bidirectional Forming and Enhanced Switching Performance by Inserting an Oxygen-Vacancy-Rich Layer

Improved Switching Reliability Achieved in HfOx Based RRAM with Mountain-Like Surface-Graphited Carbon Layer

Multilevel Resistive Switching in MoOx/MoSxOy Heterostructure Memory

Multi-Level Analog Resistive Switching Characteristics in Tri-Layer HfO2/Al2O3/HfO2 Based Memristor on ITO Electrode

Three-state resistive switching in HfO2-based RRAM

Multilevel Resistive Switching Characteristics In Ag/Sio2/Pt Rram Devices

Three-state resistive switching in HfO 2 -based RRAM

Design of CMOS Compatible, High‐Speed, Highly‐Stable Complementary Switching with Multilevel Operation in 3D Vertically Stacked Novel HfO2/Al2O3/TiOx (HAT) RRAM

Understanding the Switching Oxide Defect Formation and Recovery on HfOx Based RRAM Device

Modeling the conduction mechanisms of intrinsic multi-level states in HfO<sub>x</sub>-based resistive random access memory

Multilevel Resistive Switching in Ag/Sio2/Pt Resistive Switching Memory Device

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering