Abstract:The size tunability and chemical versatility of nanostructures enable electron sources of high brightness and temporal coherence, both of which are important characteristics for high-resolution electron microscopy(1-3). Despite intensive research efforts in the field, so far, only conventional field emitters based on a bulk tungsten (W) needle have been able to yield atomic-resolution images. The absence of viable alternatives is in part caused by insufficient fabrication precision for nanostructured sources, which require an alignment precision of subdegree angular deviation of a nanometre-sized emission area with the macroscopic emitter axis(4). To overcome this challenge, in this work we micro-engineered a LaB6 nanowire-based electron source that emitted a highly collimated electron beam with good lateral and angular alignment. We integrated a passive collimator structure into the support needle tip for the LaB6 nanowire emitter. The collimator formed an axially symmetric electric field around the emission tip of the nanowire. Furthermore, by means of micromanipulation, the support needle tip was bent to align the emitted electron beam with the emitter axis. After installation in an aberration-corrected transmission electron microscope, we characterized the performance of the electron source in a vacuum of 10(-8) Pa and achieved atomic resolution in both broad-beam and probe-forming modes at 60 kV beam energy. The natural, unmonochromated 0.20 eV electron energy loss spectroscopy resolution, 20% probe-forming efficiency and 0.4% probe current peak-to-peak noise ratio paired with modest vacuum requirements make the LaB6 nanowire-based electron source an attractive alternative to the standard W-based sources for low-cost electron beam instruments.

Nano electron source fabricated by beam-induced deposition and its unique feature

Characteristics of nano electron source fabricated using beam assisted process

Precisely-controlled Fabrication of Single ZnO Nanoemitter Arrays and Their Possible Application in Low Energy Parallel Electron Beam Exposure.

Carbon Nanotubes As Field Emission Sources

Novel Nanostructured Carbon Nanotube Electron Sources

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Carbon Nanotubes And Their Potential Field Emission Applications

Nanoscale Material Design and Processing by Electron Beam Energy

Fabrication of Carbon Nanotube Lateral Field Emitters

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Field Electron Emission from Single Carbon Nanorod Fabricated by Electron Beam Induced Deposition

Point field emission electron source with a magnetically focused electron beam

Field Nanoemitters: Ultrathin Bn Nanosheets Protruding From Si3n4 Nanowires

Characterization of Nanometer-Sized Pt-dendrite Structures Fabricated on Insulator Al 2 O 3 Substrate by Electron-Beam-induced Deposition

Composition Control of Electron Beam Induced Nanodeposits by Surface Pretreatment and Beam Focusing

Fabrication and Characterization of Single Carbon Nanotube Emitters As Point Electron Sources

Nano-welding and Nano-Cutting with an Electron Beam

Field Nanoemitters: Ultrathin BN Nanosheets Protruding from Si<sub>3</sub>N<sub>4</sub>Nanowires

High-endurance Micro-Engineered LaB6 Nanowire Electron Source for High-Resolution Electron Microscopy

Direct Electron Beam Writing of Silver-Based Nanostructures

Electron emission from nanostructures