Abstract:When photonics integrated circuits (PICs) become more massive in scale, the area of chip can't be taken full advantage of with 2×2 waveguide crossings with a 90° intersection angle. Crossings with small angles would be a better idea to further improve the area utilization, but few works have researched 2×2 crossings with different angles. In this paper, in order to have an ultra-compact footprint and a flexible intersection angle while keeping a high performance, we report a series of compact X-shaped waveguide crossings in silicon-on-insulator (SOI) waveguides for fundamental transverse electric (TE0) mode, designed by using finite-difference frequency-domain (FDFD) numerical analysis method and a global optimization method. Thanks to inverse design, a compact footprint as small as 4.5 µm2 and various angles between two input/output waveguides of 30°, 45°, 60°, 80° and 90° are achieved. Simulation results show that all crossings have good performance of insertion losses (ILs) within 0.1∼0.3 dB and crosstalks (CTs) within -20∼-50 dB in the wavelength range of 1525∼1582 nm. Moreover, the designed crossings were fabricated on a commercially available 220-nm SOI platform. The measured results show that the ILs of all crossings are around 0.2∼0.4 dB and the CTs are around -20 dB∼-32 dB; especially for the 30° intersection angle, the crossing has IL around 0.2 dB and CT around -31 dB in C band. Besides, we theoretically propose an approach of a primary structure processing technique to enhance the device performance with a more compact footprint. This technique is to remove the redundant structures in conjunction with the electric field distribution during the optimization procedure of inverse design. For the new 90° crossing structure produced by it, simulation results show that ILs of 0.29 ± 0.03 dB and CTs of -37 ± 2.5 dB in the wavelength range of 1500∼1600 nm are achieved and the footprint is shrunk by 25.5%.

Efficient Transmission of Crossing Dielectric Slot Waveguides

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

5×5 Μm2 Compact Waveguide Crossing Optimized by Genetic Algorithm

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

Low Loss Broadband Waveguide Crossing for Silicon-on-Insulator Optical Interconnect

Silicon Slot Waveguides With Low Transmission and Bending Losses at 1064 nm

High performance ultra-compact SOI waveguide crossing.

Design of Compact and Low-Emi Waveguide Structures Based on Through Glass Vias

Demonstration of a highly efficient multimode interference based silicon waveguide crossing

Ultralow-loss Waveguide Crossing for Photonic Integrated Circuits by Using Inverted Tapers

Designing Low Transmission Loss Silicon Slot Waveguide at Wavelength Band of High Material Absorption

Silicon Slot Waveguide with Low Transmission and Bending Loss at ~ 1 Μm

Electro-Optic Silicon Modulator With Horizontal Photonic Crystal Slot Slab

Transmission Structures Using Parylene C and TSV for Silicon-based Low-loss and Low-profile Heterogeneous Integrations at Ka-band

Compact And Low Crosstalk Waveguide Crossing Using Impedance Matched Metamaterial

Compact and Low Cross-Talk Silicon-on-insulator Crossing Using a Periodic Dielectric Waveguide.

Experimental Demonstration of Silicon Slot Waveguide with Low Transmission Loss at 1064Nm

Low-Loss Waveguide Crossing for Complicated On-Chip Microwave Photonic Processor

Enhancement of Optics-to-thz Conversion Efficiency by Metallic Slot Waveguides.

Ultra-Broadband Multimode Waveguide Crossing via Subwavelength Transmitarray with Bound State

Ultra-compact X-shaped Waveguide Crossings with Flexible Angles Based on Inverse Design