Abstract:As a clean and efficient secondary energy, hydrogen energy is of great significance for building a clean, low-carbon, safe and efficient energy system. At present, high-pressure gaseous hydrogen storage systems for vehicles mostly use carbon fiber reinforced composite materials as the pressure-bearing materials of hydrogen storage vessel to obtain a lighter mass, so as to ensure the hydrogen storage system has a higher hydrogen storage density. However, unlike traditional steel hydrogen storage vessel, carbon fiber composite hydrogen storage vessel has low rigidity and is prone to bending and deformation during manufacture and use, which can cause safety accidents. Most of the previous studies on mechanical properties have focused on flat laminates, which are of limited help to the study of hydrogen storage vessel. In view of this situation, this work fabricated the curved carbon fiber laminates with the same manufacturing process as the hydrogen storage vessel and investigated their flexural performance using a combination of experimental and finite element methods. The bending experiments of curved carbon fiber laminates at different angles were carried out. And the finite element model for flexural performance prediction of curved carbon fiber laminates was established through validation against the experimental results. A parametric study was further performed to analyzed the influence of carbon fiber winding angle on the flexural performance. This work will provide reference and basis for the subsequent research on the flexural performance of carbon fiber composite hydrogen storage vessel.

Theoretical and Experimental Investigation on Helium Leakage Characterization of Flexible Film-Fabric Laminated Composites

Mechanics Analysis on Helium Leakage of Flexible Composites

Experimental Study of Helium Leakage Parameters in Flexible Composite

Experimental Study on Damage-induced Helium Leakage in Flexible Composite

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Research on Flexural Performance of Curved Carbon Fiber Laminate Composites

Research on the mechanical properties prediction of carbon/epoxy composite laminates with different void contents

Experimental Investigation of the Folding Damage of the Flexible Composite Membranes

Meso-Scale Tearing Mechanism Analysis of Flexible Fabric Composite for Stratospheric Airship via Experiment and Numerical Simulation

Helium leakage inspection method based on conservation of mass

Review of Research on Gas Retention Layer Material for Stratospheric Airship Envelope and Helium Permeation in Polymers

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

Investigation of Mechanical Behavior of Weld Seams of Composite Envelopes in Airship Structures

Crack Density-Based Semi-Quantitative Estimation for Leak Rate of Composite Laminates with Thin-Plies

The Finite Element Analysis of Vacuum Leak Detection Container

Investigation of the Tearing Properties of a New Airship Envelope Fabric Based on Experimental and Theoretical Methods

Interfacial Failure in Flexible Electronic Devices

Effects of Interfacial Properties on the Ductility of Polymer-Supported Metal Films for Flexible Electronics

Research on the Total Leakage Rate Leak Detection Technology of the Large Spacecraft