Abstract:In this paper, numerical simulations and experiments were carried out to study the dynamic characteristics of thin‐walled carbon fiber‐reinforced polymer tubes with delamination damage. The effects of delamination size and delamination location on the dynamic characteristics of the structure were summarized. Thin‐walled carbon fiber‐reinforced‐polymer (CFRP) tubes are susceptible to damage, which impacts their dynamic characteristics. This paper investigates the influence of delamination damage on the dynamic properties of thin‐walled CFRP tubes through finite element simulation and experimental methods. A transversely isotropic principal model is employed to establish the geometric model. Delamination damage is induced using the cohesive zone model and the secondary stress criterion. Both circumferential and elliptical delamination cases are studied. The modal test is conducted using the hammer excitation method. It is observed that the finite element model aligns with the experimental results. It is discovered that the larger the delamination size, the lower the natural frequency for a given damage location. The location of the delamination within a single layer has minimal effect on the natural frequency. The natural frequency exhibits a symmetrical pattern of decreasing and then increasing as the delamination shifts from the sides toward the center layer. Positional information is discernible in the modal shape, which can be utilized for delamination detection and localization. Highlights The damage model is built by transversal isotropic equation and cohesive unit. Finite element model is built with various delamination sizes and locations for two cases. Modal tests are performed on CFRP tubes and obtained good accuracy. Effect of delamination size and location on dynamic parameters is discussed.

Experimental Study on Damage-induced Helium Leakage in Flexible Composite

Mechanics Analysis on Helium Leakage of Flexible Composites

Experimental Study of Helium Leakage Parameters in Flexible Composite

Theoretical and Experimental Investigation on Helium Leakage Characterization of Flexible Film-Fabric Laminated Composites

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Damage Detection And Leakage Alert Of Fiber Composite Wrapped Tank For High Pressure Hydrogen Storage

Experimental Investigation of the Folding Damage of the Flexible Composite Membranes

Research on Flexural Performance of Curved Carbon Fiber Laminate Composites

Elastic Leak of a Seal

High Pressure and Long-Term Gas Diffusion Coupled Damage of Composites Through a Multi-Physical Phase Field Framework

Experimental and Simulation Research on Hydrogen Leakage of Double Ferrule Joints

Experimental Study on Carbon Fiber/epoxy Laminates under Dynamic Tensile and Their Damage Analysis

Investigation on the leakage resistance of metal‐fiber‐metal pressure vessel coupled with deformation

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Damage failure analysis of flexible-oriented three dimensional woven composites with void defects: An experimental and numerical study

Crack Density-Based Semi-Quantitative Estimation for Leak Rate of Composite Laminates with Thin-Plies

A New Leakage Measurement Method for Damaged Seal Material

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations

Effects of various porosities on the damage evolution behavior of carbon fiber/epoxy composites using acoustic emission and micro-CT

Effect of delamination on the dynamic characteristics of thin‐walled carbon fiber‐reinforced polymer tube

Experimental and numerical analysis of failure in flexible pipe by a mechanism of intentional damage