Abstract:As a key factor affecting thermal behaviors of liquid hydrogen (LH2) tanks, heat leakage plays an important role in accurate prediction of pressure build-up for safe storage and transportation of LH2. Uniform heat flux between vapor and liquid in LH2 tanks is widely adopted as thermal boundary condition in predicting pressure build-up process. However, a distribution of heat flux between vapor and liquid was observed during the self -pressurization process in the experimental test. In light of this, an analytically theoret-ical model of revealing the energy exchange process among the vapor, liquid and inner wall is proposed to investigate the heat leakage distribution ratio (HDR) between vapor and liquid in LH2 tanks. The feasibility of the model is validated by the experimental results from NASA. In the whole self-pressurization process of 25,000 s, HDR reduces from 0.803 to 0.235 under a liquid fill ratio of 90% and a total heat leakage of 71.3 W. The results show that the existence of inner wall and different thermal properties between the vapor and liquid make the heat leakage flux non-uniformly distributed into the vapor and liquid. And the geometric structure of tank, thermal properties and initial states of the vapor and liquid have a significant effect on HDR. When coupling the model with thermal multi-zone model, the relative error in pressure prediction is reduced by 61.8% against experimental results. Benefiting from the coupled model, the relative error in pressure prediction caused by the uniform heat flux boundary condition reduces from 90.16% to 8.15%. The present work establishes theoretical foundation on analyzing heat leakage distribution between the vapor and liquid for LH2 tanks, and provides useful guidance on modifying boundary conditions in accurately predicting thermal behaviors of LH2 tanks.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Mechanics Analysis on Helium Leakage of Flexible Composites

Theoretical and Experimental Investigation on Helium Leakage Characterization of Flexible Film-Fabric Laminated Composites

Experimental Study of Helium Leakage Parameters in Flexible Composite

Experimental Study on Damage-induced Helium Leakage in Flexible Composite

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Mechanical Analysis of Carbon Fiber Wound High Pressure Hydrogen Storage Vessel and Prestress Control in Manufacturing Process

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Permeation of Compressed and Supercritical Fluids Through Porous Membranes

Study on Flow Characteristics of Helium

Finite Element Analysis of Adhesive Failure of Solid Composite Propellant Multi-material Structure for Underwater Intelligent Equipment

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Finite Element Analysis of Leakage about Metallic Sealing Ring Used in Aircraft Engine

Thermo-mechanical Investigation of Composite High-Pressure Hydrogen Storage Cylinder During Fast Filling

Helium leakage inspection method based on conservation of mass

Interface Leakage Theory of Mechanical Seals Considering Microscopic Forces

Complementary use of analytical equations and numerical models for composite liner designs

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

Theoretical Analysis of Reinforcement Layers in Bonded Flexible Marine Hose under Internal Pressure

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

Analytical and Numerical Predictions of Hydrogen Gas Flow Induced by Wall and Corner Leakages in Confined Space

Analysis of Static Sealing Rules of Foamed Silicone Rubber Based on a Porous Media Model