Abstract:The fluid flow in the small pore throat is a nonlinear flow, and the microscopic force between the fluid and the wall cannot be ignored. However, the previously established theories about the leakage between sealing interfaces have not considered the influence of microscopic forces. Based on contact mechanics and percolation theory, the void characteristics of the sealing interface were clarified, and the influence of microscopic force on fluid flow in porous medium was analyzed. Combined with the capillary force, the concept of a critical void radius between the mechanical seal interfaces is proposed. The fluid flow resistance model and leakage rate calculation equation of the sealing interface considering the van der Waals force are established, and the leakage judgment criterion of the sealing interface is provided. Through numerical calculation and experiments, the effect of microscopic force is verified in terms of the fluid flow law and macroscopic leakage rate. The results show that van der Waals forces have an important influence on the fluid flow between the sealing interfaces. As the microchannel size decreases, the van der Waals forces between solid and liquid increase, and the influence of these van der Waals forces on the fluid flow between the sealing interfaces cannot be ignored. The calculation model of the sealing interface leakage rate proposed in this paper shows little difference with the results of the Persson model, and is in good agreement with the experimental results; the maximum relative error is 8.7%, the minimum relative error is only 3.8%.

What problem does this paper attempt to address?

### Problems Addressed by the Paper The paper primarily explores the leakage theory of mechanical seal interfaces, considering the impact of microscopic forces on fluid flow. Specifically, the paper attempts to address the following issues: 1. **Impact of Microscopic Forces on Fluid Flow**: - Traditional theories neglect the role of microscopic forces (such as van der Waals forces) when explaining the leakage mechanism of mechanical seal interfaces. This paper proposes a new fluid flow resistance model and leakage rate calculation formula by analyzing pore characteristics and the impact of microscopic forces on fluid flow in porous media. 2. **Relationship Between Pore States and Leakage**: - Based on contact mechanics and seepage theory, the paper clarifies the pore characteristics of the sealing interface and categorizes the pores into non-seepage state, critical seepage state, and seepage state. Through the analysis of these states, the conditions under which fluid leakage occurs in different pore states are revealed. 3. **Role of Van der Waals Forces**: - The paper focuses on the impact of van der Waals forces on fluid flow and introduces a new concept of critical pore radius. As the size of microchannels decreases, the van der Waals forces between solid and liquid increase, and this force's impact on fluid flow cannot be ignored. 4. **New Model and Experimental Validation**: - A leakage rate calculation model for the sealing interface considering van der Waals forces is proposed, and its effectiveness is validated through numerical simulations and experiments. The results show that the new model is generally consistent with the Persson model and matches well with experimental results, with a maximum relative error of only 8.7% and a minimum relative error of 3.8%. Through the above research, the paper provides a foundation for improving the leakage theory of mechanical seals and helps accurately predict leakage rates and formulate effective leakage prevention measures.

Interface Leakage Theory of Mechanical Seals Considering Microscopic Forces

Analysis of force and leakage in water hydraulic motor' s piston pairs

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

A Porous Media Leakage Model of Contact Mechanical Seals Considering Surface Wettability

A Percolation Method of Leakage Calculation and Prediction Within the Mechanical Seal Interface

A Leakage Rate Model for Metal-to-Metal Seals Based on the Fractal Theory of Porous Medium

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

The Theoretical Basis of Face Contact Pressure Design of the Zero-Leakage Mechanical Seal

Theory of the leak-rate of seals

Percolation interpretation of film pressure forming mechanism of mechanical seal and calculation method of film pressure coefficient

Prediction of sealing interface leakage based on porous medium model considering effective porosity

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

The effect of surface roughness on thermal-elasto-hydrodynamic model of contact mechanical seals

An Approach to Calculate Leak Channels and Leak Rates Between Metallic Sealing Surfaces

An improved mixed lubrication model for revealing the mechanism of high speed and frictional heat on sealing performance

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Semi-analytical Fluid-solid Coupling Model for Hydrostatic Mechanical Seals

Fluid-solid Strong-Interaction Model of Mechanical Seals in Reactor Coolant Pumps

Tangential contact modeling to seal considering elastic-plastic for lubrication transition mechanism

The Heat Conduction Model and Leakage Characterization of the Sealing Interface

Multi-Physical Field, Coupled, Mixed Lubrication Analysis of Hydraulic Reciprocating Vacuum Lip Seal