Abstract:The conclusion that the film pressure coefficient is inferred from the existing film pressure coefficient calculation method based on the assumption of microleakage at the sealing interface is about 0.5 seriously affects the accuracy of the mechanical seal contact pressure design. The composition of the fluid film pressure between the contact mechanical sealing interfaces was analyzed from a microscopic point of view, the formation mechanism of the film pressure is explained based on the percolation theory, and the fractal parameter calculation model of equivalent rough contact surface was proposed. The fluid-infiltrated sealing interface area on the inside and outside of the sealing line is discussed and determined, and a calculation method for the film pressure coefficient of the contact mechanical seal based on the percolation theory is established, and its correctness is verified by theoretical analysis and numerical simulation. The research shows that the film pressure coefficient can be determined by the calculation method of the film pressure coefficient established in this paper regardless of whether the sealing interface is leaky or not; the film pressure coefficient is related to the morphology parameters and the porosity of the sealing interface. For the four groups of rotating and stationary rings seal end face groups with different morphology parameters given in the paper, when the porosity is between 0-0.312, the film pressure coefficient is between 0-0.0547; when the porosity is between 0.312-0.593, the film pressure coefficient is between 0.0547-0.1791; at the initial porosity, the film pressure coefficient reaches 0.5374. The research results provide a theoretical basis for mechanical seals' design and engineering application.

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

Analytical model for the sealant performance of tunnel gasketed joints based on multi-scale contact and percolation theories

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

Theory of the leak-rate of seals

A Leakage Rate Model for Metal-to-Metal Seals Based on the Fractal Theory of Porous Medium

A Porous Media Leakage Model of Contact Mechanical Seals Considering Surface Wettability

A Percolation Method of Leakage Calculation and Prediction Within the Mechanical Seal Interface

Interface Leakage Theory of Mechanical Seals Considering Microscopic Forces

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

An Approach to Calculate Leak Channels and Leak Rates Between Metallic Sealing Surfaces

Prediction of sealing interface leakage based on porous medium model considering effective porosity

Macroscopical contact pressure and microscopic leakage performance analysis of rubber seal considering thermal oxygen aging effect

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

Gas Leakage Evaluation of Metallic Sealing Surfaces with Annular Morphology

Capillary non-Newtonian seepage model of unvulcanized rubber expressed by the four-parameter rheological flow

Tangential contact modeling to seal considering elastic-plastic for lubrication transition mechanism

Percolation interpretation of film pressure forming mechanism of mechanical seal and calculation method of film pressure coefficient

A mechanism leakage model of metal-bipolar-plate PEMFC seal structures with stress relaxation effects

Analysis of Static Sealing Rules of Foamed Silicone Rubber Based on a Porous Media Model

Gas Leakage Prediction of Contact Interface in Fabric Rubber Seal Based on a Rectangle Channel Model

Analysis of Sealing Performance of a Kind of Profiled Rubber Gasket Used in the Radial Contact Seal Structure