Abstract:The intrusion of moisture may induce an abnormal increase in temperature or may even cause fractures in insulation equipment. Therefore, the hygroscopicity of rubber materials must be characterized. However, the existing methods for weighing organic polymer materials, such as silicone rubber, for moisture-absorption tests are time-consuming. In this article, a practical method for testing the moisture-absorption performance of silicone rubber materials for external insulation is proposed. The basic characteristics of the Langmuir diffusion equation for the water-absorption characteristics of silicone rubber are analyzed. A Langmuir curve fitting method based on the contraction–expansion (C–E) algorithm is developed, and its fitting effect is preliminarily verified by combining the experimental errors obtained from the experiment. Results show that the fitting effect has a strong relationship with the initial range of diffusion coefficient, bonding coefficient, and debonding coefficient. The time-consuming process of directly applying the fitting method is reduced from 70 to 50 days. The initial ranges of diffusion, bonding coefficient, and debonding coefficient are determined via the results of molecular simulations and experiments combined with an analysis of the literature. A prediction model is optimized and then validated against the experimental data from the recent literature on the water-absorption characteristics of silicone rubber at different temperatures. The experimental time required to reach saturated water absorption is remarkably reduced from 70 days to 1 day. Therefore, the method developed herein is feasible for engineering applications. Moreover, the entire water-absorption curve can be possibly plotted with an error of not greater than 5% via this prediction method.

Analysis of Static Sealing Rules of Foamed Silicone Rubber Based on a Porous Media Model

A Porous Media Leakage Model of Contact Mechanical Seals Considering Surface Wettability

Macroscopical contact pressure and microscopic leakage performance analysis of rubber seal considering thermal oxygen aging effect

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

On the Use of Foam Rubber for Sealing Applications

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

The Deterioration of Foamed Silicone Rubber in Humid and Hot Environments

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Interface Leakage Theory of Mechanical Seals Considering Microscopic Forces

A Systematic Method for Characterizing the Elastic Properties and Adhesion of a Thin Polymer Membrane

Method for Predicting the Water Absorption of External Insulating Silicone Rubber

A Leakage Rate Model for Metal-to-Metal Seals Based on the Fractal Theory of Porous Medium

An Approach to Calculate Leak Channels and Leak Rates Between Metallic Sealing Surfaces

Prediction of the Contact Behavior of Stepseals: Experimental and Numerical Investigations

Prediction of sealing interface leakage based on porous medium model considering effective porosity

Gas Leakage Prediction of Contact Interface in Fabric Rubber Seal Based on a Rectangle Channel Model

Analysis on Self-compressibility of Sealing Materials under High Pressure in Deep-sea

Tangential contact modeling to seal considering elastic-plastic for lubrication transition mechanism

Leakage, heat transfer and thermal deformation analysis method for contacting finger seals based on coupled porous media and real structure models

Numerical study on the large deformation of silicone rubber foams based on random cell models